CGC SA-101 Fire-Resistant Assemblies PDF

Preview

Summary

Download CGC SA-101 Fire-Resistant Assemblies PDF

Description

Comprehensive test information on fire- rated assemblies incorporating CGC products and systems

Fire-Resistant Assemblies

SA-100

One of the most critical issues for architects is ensuring that building design addresses fire safety issues. This resource lists fire-resistant assemblies using CGC products and systems, as well as the related evaluation reports. The results of acoustical tests are also included, where relevant.

Fire Safety

User’s Guide

Use this brochure to determine fire ratings for CGC products and systems. This brochure provides: —Comprehensive information about fire-rated assemblies —Product and system attributes to help you identify the system that meets your project requirements for life safety, structural performance and acoustics —Easy access to CGC’s technical information or to specific data

Pages

Understand Your System

4

Fire Protection Selector Overview Test Certification

Select Your System

8

Cross- reference of CGC Panels and ULC/ UL Fire Ratings Legend Selector

Design Your System

60

Screw Spacing and Location Good Design Practices Design Details

Specify Your System

66

Standards and Reports ULC/ UL Type Designations Metric Conversions Index to Fire- Resistive Designs Limiting Heights Table

For More Information

Customer Service 800 387.2690 Web Site www.cgcinc.com

3 CGC Fire- Resistant Assemblies

Fire Protection

CGC is the undisputed leader among building material manufacturers in providing products and systems designed to keep people safe from fire. Fire safety properties are described in terms of fire resistance, surface-burning characteristics and noncombustibility.

Fire Safety

Building assembly’s fire resistance

The period of t ime t he assembly will serve as a barrier to t he spread of f ire and how long the assembly can function structurally after it is exposed to a fire of standard intensit y as defined by CAN/ULC S101 and ASTM E119. Sometimes this is also called the assembly’s fire endurance.

Flame spread

The measure of a material’s relat ive burning behavior. Both t he flame spread and smoke developed are measured in accordance with CAN/ULC S102M, and ASTM E84.

Noncombustible material Class A designation

A material t hat will not burn or contribute any appreciable amount of fuel to a f ire, as determined through CAN/ULC S114 and ASTM E136. Refers to material that may ignite but will not sustain a flame. Class A products will not generate excessive visibilit y-obscuring smoke, an impor tant factor in designing saf e egress for building occupants. Class A is not a fire-resistance designation.

Fire- Rated

Fire-resistance rat ings have long been used by UL/ULC, ASTM and building codes to measure the per formance of various construct ions for f ire containment purposes. As applied to elements of buildings, t he fire- resistance rat ing classif ies t he abilit y of an assembly to conf ine and isolate fire wit hin a zone comprised of f ire resist ance- rated walls, ceiling and floor assemblies. The ratings relate to fire tests designed to determine how quickly fire can raise t he temperature to unacceptable levels. Fire-rated assemblies are tested and cer tif ied in t heir ent iret y. These designs are ident if ied in t he ULC and UL Fire Resistance Director y, which is updated yearly and can be referenced at t he Underwriters Laboratories of Canada website at www.ULC.ca, and t he Underwriters Laboratories web site at www.ul.com.

Fire Resistance

All ULC and UL assemblies listed in t his folder are cer t if ied for use in Canada and comply with CAN/ ULC S101 for f ire resistance. The Standards Council of Canada recognizes ULC and UL as accredited test ing and cert ificat ion organizat ions for cer tif ication of materials and system s to Canadian standards.

For More Information

If you have addit ional quest ions regarding f ire protect ion, use the following resources:

CGC Literature Industry Resources

CGC Gypsum Construction Handbook Underwriters Laboratories of Canada, List of Equipment and Materials, Fire Resistance Underwriters Laboratories, Inc. Fire Resistance Director y, Volume One

4 CGC Fire- Resistant Assemblies

Selector Overview

The sections listed below correspond to the different types of assemblies in which CGC products are tested. Each section is arranged sequentially according to fire ratings, the criterion that most often governs selection. Each entry within a section contains a reference to the source for more information within the Architectural Reference Library binder.

Pages

A

Partitions

10- 24

Steel- framed, including non- loadbearing, loadbearing and chase walls; wood- framed, including non- loadbearing, loadbearing and chase walls; area separat ion walls; shaft walls; and masonr y walls. Includes gypsum base and veneer finishes, gypsum drywall, cement board and conventional lath and plaster.

B

Floors/ Ceilings

25- 43

Steel- framed, including steel bar joist framing, steel C-joist framing, and steel truss; wood- framed, including dim ensional lumber, engineered joist and truss; and structural concrete.

C

Roof/ Ceilings

44- 50

Steel- framed, including steel bar joist framing, steel C-joist framing, steel truss and steel roof deck; wood- framed, including dimensional lumber, engineered joist and truss; and structural concrete.

D

Horizontal Membrane

51

Shaft wall used in a horizontal plane.

E

Structural Fireproofing

52- 55

Column, beam, t hrough- penetrat ion walls and floors, and joists. Basic m ethods of protect ing columns and beams wit h gypsum base and veneer f inishes, mineral f ireproof ing, and gypsum dr ywall.

F

Exterior Walls

56- 59

Steel- framed, including loadbearing and non- loadbearing; and wood- framed, including loadbearing. Includes exterior curtain wall assemblies.

5 CGC Fire- Resistant Assemblies

Test Certification

Test Conditions and Certification

Fire and sound tested assemblies listed in t his Selector are based on characterist ics, proper t ies and per formance of materials and syst ems obtained under controlled test conditions as set for th in the appropriate ULC and ASTM Standards in ef fect at t he t ime of test. These list ings are shor t summaries to serve as a compilation and guide of construct ion assemblies available in t he selection process. For complete informat ion on construct ion details and components used in these systems, refer to the individual Folder reference. CGC Inc. will provide inf ormat ion for published f ire, sound and struct ural data covering systems designed and constructed according to its published specif ications. Tests are conducted on Company products assembled to meet performance requirement s of established test procedures specif ied by various agencies. System per formance following any substitut ion of materials or compromise in assembly design cannot be cert ified and may result in failure under crit ical conditions. Sound tests are conducted under controlled laboratory condit ions according to ASTM procedures. Comparable f ield performance depends on building design and careful at tention to detailing and workmanship. Cert ain sound t ests, conducted in accordance with ASTM m ethods, measured sound transmission of 11 frequencies. These data have been retained in this Selector to serve as a guide to t he designer. Based on experience, t he STC values are ver y close to t hose obtained f or the assembly under current met hods at 16 frequencies. Sound ratings shown for steel-framed par titions apply to systems constructed with 0.5 mm (25 gauge) steel studs 610 mm (24 ⬙) o.c., unless otherwise noted. Heavier gauge studs are more rigid and may not provide the same sound ratings.

Loading Conditions

All load bearing assemblies, wit h except ion of steel columns, are required to be loaded to t heir full design capacit y during tests for f ire resistance as required in CAN/ULC S101 and ASTM E119. The 2005 edit ion of t he Nat ional Building Code of Canada now references t he Third Edition of CAN/ULC S101-04 t hat requires applied loads be calculated under Limit States design principles. The previous edition referenced in t he 1995 Nat ional Building Code of Canada permit t ed the use of Working Stress or Limit States principles for calculat ion of applied loads. In some cases there may be a signif icant dif ference between these calculations of applied loads. In t hese cases ULC and UL are amending t heir on-line and subsequent printed directories to provide guidance in t he “Guide Informat ion” sect ion and notat ing individual designs t hat may require invest igation as to “Load Restrict ion” or “Reduct ion” of t he design. This applies to both ULC and UL

designs as well as assemblies certified by other Standards Council of Canada recognized agencies such as Intertek (Warnock- Hersey International)

6 CGC Fire- Resistant Assemblies

Abbreviations

In t he Selector, the following abbreviations may be used. Est imated f ire rat ings are based on an engineering evaluation by qualif ied professionals. acoust alt alum appl at t at ten betw bd cem chan clg col com conc cont in conv corrug cr ctd dbl Des ea equiv est exp

acoustical alternate aluminum applied at tached at tenuation between board cement channel ceiling column common concrete continuous convent ional corrugated cold rolled coated double Design each equivalent estimated exposed

fin firepr fg fixt flr freq ft fur ga galv hex horiz hr ht insul int lamin lbr lightwt max met min nom noncomb o.c. opp

finish or finished fireproofing fixture floor frequency foot or feet furring gauge galvanized hexagonal horizontally hour height insulat ing or insulation interior laminated lumber lightweight maximum metal mineral or minimum nominal noncombust ible on center opposite

oz par tn pcf perim plywd prot qtr recom reg rel resil run SAFB sep separ stag stl struc subflr susp T&G unfin ver t wd wt

Agencies

Fire

Agencies

Sound

Sound Rat ings

ASTM

American Societ y for Test ing and Materials Consult ing Engineers Group Gypsum Assoc. (Fire Resistance Design Manual GA-600) Ohio State Universit y Universit y of California Underwriters Laboratories Inc. Underwriters Laboratories of Canada Warnock Hersey International

BBN CK G& H KAL RAL SA USG

Bolt, Beranek and Newman Cedar Knolls Acoust. Laboratories Geiger & Hamme Kodaras Acoustical Laboratories Riverbank Acoust ical Laboratories Shiner & Assoc. USG Corporat ion

CAC

CEG GA OSU U of C UL ULC WHI

7 CGC Fire- Resistant Assemblies

IIC STC

ounce par t it ion pounds per cubic foot perimeter plywood protected or protect ion quarter recommended regular relocatable resilient runner(s) sound at tenuation fire blankets separate separated staggered steel structural subfloor suspended or suspension tongue and groove unfinished ver tically wood weight (kg/m2 lb./sq. ft.)

ceiling at tenuation class per ASTM procedures impact insulation class per ASTM procedures sound transmission class per ASTM procedures

Cross Reference of CGC Panels and ULC/ UL Fire Ratings

The f ollowing table lists the CGC panels that are appropriate to use f or dif f erent ULC/UL f ire-resist ive Designs.

CGC Panels

CGC Panels

CGC Panels

15.9 mm (5/ 8⬙) GRAND PRIX Gypsum Base or SHEETROCK FIRECODE Core or HUMITEK FIRECODE Core Gypsum Panels

V439, V444, V448, X502, X504, X508, X516, X536

12.7 mm (1/ 2⬙) SHEETROCK Abuse- Resistant Gypsum Panels

UL Design Number

U504, U512, W301, W303, W313, W407, W416, W423, W424, W447, W448, W449, ULC Design Number G512, I508, I524, L511, W450, W452, W453, W454, M506, M508, M511, M512, W507, W509, W510, W511, M513, M514, O503, O504, W600, W603 R500, R501, U301, U311,

U466, U467, U469, U473, G503, G531, L501, L508, U485, U493, U504, U505, N501, N502, N505, P515, U506, U512, U513, U603, P516, U026, U301, U302, U606, U609, U615, U617, U303, U304, U305, U308, U622, U625, U640, V411, 15.9 mm (5/ 8⬙) SHEETROCK Abuse- Resistant U314, U321, U329, U338, V417, V419, V431, V433, Gypsum Panels U342, U344, U345, U354, V439, V444, X508, X516 UL Design Number U454, U458, U459, U460, U355, U372, U404, U408, ULC Design Number U026, U301, U302, U303, U465, U466, U467, U473, U411, U415, U419, U420, M500, M506, M514, O503, U304, U305, U308, U314, U475, U485, U493, U494, U423, U424, U425, U430, O504, U301, W301, W407, U321, U322, U223, U324, U504, U505, U512, U513, U438, U442, U445, U451, W423, W449, W452, W453, U325, U326, U329, U330, V417, V419, V444 U454, U458, U459, U465, W454, W600 U332, U344, U345, U354, ULC Design Number U355, U372, U411, U415, M500, M506, M514, O503, 15.9 mm (5/ 8⬙) GYPLAP FIRECODE Core U419, U420, U423, U424, O504, U301, W301, W407, Gypsum Sheathing U606, U609, U615, U617, U425, U430, U434, U438, W423, W449, W452, W453, UL Design Number L501, L508, N501, N502, U622, U625, U637, U640, U442, U445, U450, U451, W454, W600 N505, U026, U301, U302, U304, U305, U308, U314, U321, U338, U342, U344, U354, U355, U372, U404, U408, U411, U415, U419, U423, U424, U442, U430, U459, U465, U466, U467, U473, U485, U504, U505, U506, U512, U513, U603,

V411, V417, V419, V431, V433, V439, V444, X508, X516

12.7 mm (1/ 2⬙) GRAND PRIX FIRECODE C Core Gypsum Base or SHEETROCK FIRECODE C Core Gypsum Panels

ULC Design Number

UL Design Number

M500, M506, M514, O503, O504, U301, W301, W407, W423, W449, W452, W453, W454, W600

D502, G502, G515, G523, G524, G526, G527, G528, G529, G530, G531, G533, G534, G541, G545, L502, L510, L512, L514, L515, L524, L525, L530, L531, L542, L559, P237, P510, P512, P520, P532, P534, U307, U317, U320, U345, U406, U412, U415, U419, U423, U424, U425, U426, U435, U436, U438, U440, U441, U443, U444, U448, U451, U452, U453, U454, U455, U467, U474, U478,

15.9 mm (5/ 8⬙) SHEETROCK FIRECODE Core Water- Resistance Gypsum Panels

U497, U529, U601, U603, U608, U611, U613, U619, U620, U910, U912, U914, V410, V411, V418, V433, X507, X514, X515, X518, X521, X522, X523, X524, X530, X531

ULC Design Number

I507, I517, I518, I521, U505, U506, U512, U513, I522, I523, L512, M505, L501, L508, N501, N502, U603, U606, U609, U615, M507, M509, M511, U406, N505, U026, U301, U302, U617, U622, U625, U637, W302, W406, W408, W417, U303, U304, U305, U308, U640, V417, V419, V433, W423, W424, W426, W433, U314, U321, U338, U342, V439, V444, X508, X516 W442, W445, W452, W453, U344, U354, U355, U372, ULC Design Number W506, W511, W602, W604, U404, U408, U411, U415, M500, M506, M514, O503, X518, X521 U419, U423, U424, U438, O504, U301, U504, U512, U442, U459, U465, U466, W301, W407, W423, W452, 12.7 mm (1/ 2⬙) SHEETROCK FIRECODE C Core Water- Resistance Gypsum Panels U467, U473, U485, U504, W453, W454, W600

UL Design Number

15.9 mm (5/ 8⬙) GRAND PRIX FIRECODE C Core Gypsum Base or SHEETROCK FIRECODE C Core Gypsum Panels P519, P521, P522, P523, UL Design Number D301, D501, D502, D503, G503, G512, G515, G516, G521, G523, G525, G526, G527, G528, G529, G530, G531, G540, G542, G543, G544, G545, G546, J501, J502, J503, J504, L501, L508, L511, L512, L513, L514, L516, L520, L521, L523, L525, L526, L527, L528, L529, L530, L531, L538, L541, L545, L546, L548, L549, L550, L551, L552, L553, L559, L560, L563, N501, N502, N505, P501, P503, P504, P505, P506, P507, P508, P509, P510, P513, P514, P515,

P524, P525, P526, P527, P528, P529, P530, P531, P532, P534, P535, P536, P537, P544, U023, U301, U302, U303, U305, U308, U311, U327, U329, U333, U334, U342, U344, U354, U355, U372, U404, U408, U411, U415, U419, U423, U424, U430, U442, U445, U457, U458, U459, U465, U466, U467, U469, U473, U485, U504, U505, U512, U528, U602, U603, U605, U618, U623, U626, U627, U634, U635, U639, U640, U642, U643, U465, V414, V417, V419, V431, V433,

8 CGC Fire- Resistant Assemblies

UL Design Number

ULC Design Number

D502, G524, L502, L515, U307, U317, U406, U412, U415, U419, U423, U424, U438, U441, U443, U444, U451, U452, U453, U454, U455, U474, U603, U613, V411, V419, V433, V444

I507, I517, I518, I521, I522, I523, L512, M505, M507, M509, M511, U406, W302, W406, W408, W417, W423, W424, W426, W433, W445, W452, W453, W506, W511, W602, W604, X518, X521

SHEET ROCK Gypsum or H UMIT EK Gypsum Liner Panels UL Design Number ULC Design Number L541, U336, U408, U415, W314, W452, W506, W507, U438, U441, U459, U467, W508 U469, U492, U504, U505, U529, V411, V433

UL Design Number

W302, W406, W408, W417, U317, U406, U423, U424, W423, W424, W426, W433, W445, W452, W453, W506, U425 W511, W602, W604, X518, ULC Design Number I507, I517, I518, I521, X521 I522, I523, L512, M505, M507, M509, M511, U406,

15.9 mm (5/ 8⬙) FIBEROCK Sheathing, AQUA- TOUGH Interior Panels, Abuse- Resistance Panels or VHI Abuse- Resistance Panels U493, U606, U609, U615, UL Design Number U301, U302, U303, U304, U617, U622, U625, U640, U305, U308, U314, U321, V411, V417, V431, V439, U329, U342, U344, U345, V444 U354, U355, U359, U372, U404, U408, U411, U415, U419, U423, U424, U430, U432, U438, U442, U445, U458, U459, U465, U466, U467, U469, U473, U485,

Legend

This legend contains t he symbols used t hroughout t he Architectural Ref erence Librar y to represent various architectural elements. Prof ile and cross- section views are shown where appropriate, along wit h architectural material symbols.

Architectural Elem ents

Architectural Elem ents

Component

Component

Cross Section Profile

C-H studs

Polyst yrene insulat ion

Z-f urring

Blanket insulat ion

Engineered

Solid wall

joist Plywood Decking Cement board Decking Poured gypsum Lath Gypsum board or plaster Wood truss Veneer f inish

Tile Wood joist or stud Concrete or precast concrete Steel joist or stud

Steel truss

Resilient channel

Furring channel

9 CGC Fire- Resistant Assemblies

Ceiling panel

Cross Section Architectural M aterial Symbols

A

Partitions Steel Framed

1 Hour Fire- rated Construction

Non- loadbearing

Construction Detail

Description

wt. 6

124 mm (47⁄ 8")

wt. 6

117 mm (45⁄ 8")

wt. 6

121 mm (43⁄ 4")

wt. 5

89 mm (31⁄ 2")

wt. 7

100 mm (4")

Test Number

• 15.9 mm (5/8 ⬙) SHEETROCK® FIRECODE® Core Gypsum Panels or GRAND PRIX® FIRECODE Core Abuse-Resistant Gypsum Base, or FIBEROCK® Panels – 92 mm (3- 5/8 ⬙) 0.5 mm (25 gauge) steel studs 610 mm (24 ⬙) o.c. – joints finished • optional veneer plaster

ULC Des W453 or W407 or UL Des U419 or U465

• 15.9 mm (5/8 ⬙) GRAND PRIX FIRECODE Core Gypsum Base one side – 89 mm (3- 1/2 ⬙) 0.8 mm (20 gauge) steel studs 400 mm (16 ⬙) o.c. • 12.7 mm (1/2 ⬙) DUROCK® Cement Board o...