Title | Computer Aided Drafting all exam |
---|---|
Course | BS Computer Engineering |
Institution | AMA Computer University |
Pages | 126 |
File Size | 3.1 MB |
File Type | |
Total Downloads | 16 |
Total Views | 137 |
Computer Aided Drafting exam answere test...
Question 1 Complete Mark 1.00 out of 1.00
Flag question
Question text It is a film on which drawings or other printed materials are photographed at greatly reduced size for ease of storage.
Select one: a. Microfilm b. Diazo c. Zoning d. Vellum Question 2 Complete Mark 1.00 out of 1.00
Flag question
Question text The term generation refers to the number of times a copy of an original drawing is reproduced and used to make other copies.
Select one: True False
Question 3 Complete Mark 1.00 out of 1.00
Flag question
Question text This type of CAD software allows only a single user to work on a single file at a time.
Answer:
Single-file-mode systems
Question 4 Complete Mark 1.00 out of 1.00
Flag question
Question text Durability is a consideration if the original drawing will be extensively used. Select one: True False Question 5 Complete Mark 1.00 out of 1.00
Flag question
Question text It is technology for design and technical documentation, which replaces manual drafting with an automated process.
Answer:
computer-aided design and drafting
Question 6 Complete Mark 1.00 out of 1.00
Flag question
Question text The mechanical engineer’s scale is commonly used for mechanical drafting when drawings are in fractional or decimal inches.
Select one: True False Question 7 Complete Mark 1.00 out of 1.00
Flag question
Question text This plane is perpendicular to some principal plane, then the drawing on such drawing is called ________.
Select one: a. Unilateral Auxiliary Views b. Symmetrical Auxiliary Views c. Primary Auxiliary Views d.
Bilateral Auxiliary Views Question 8 Complete Mark 1.00 out of 1.00
Flag question
Question text If the inclined surface is seen in the top plane, then such an auxiliary view will be called Answer
Top Auxiliary View
.
Question 9 Complete Mark 1.00 out of 1.00
Flag question
Question text It refers to the material on which you create drawings, such as paper or polyester film. Select one: a. Film b. Drawing c. Media d. Radio Question 10 Complete Mark 0.00 out of 1.00
Flag question
Question text 3D models as they can be viewed and rotated in any direction Answer -x,y or z
.
Question 11 Complete Mark 1.00 out of 1.00
Flag question
Question text Dividers
Answer are used to transfer dimensions or to divide a distance into a number of equal parts.
Question 12 Complete Mark 0.00 out of 1.00
Flag question
Question text transparen
Answer is one of the most important characteristics of drawing media when reproducing the drawing using the diazo print process.
Question 13 Complete Mark 1.00 out of 1.00
Flag question
Question text The _________ clamps to a table and through an elbow like arrangement of supports allows you to position the protractor head and scales anywhere on the board.
Select one: a. head machine b. auto machine c. tail machine d. arm machine Question 14 Complete Mark 1.00 out of 1.00
Flag question
Question text compass
A Answer
Question 15 Complete Mark 1.00 out of 1.00
is an instrument used to draw circles and arcs.
Flag question
Question text It can also be used as straightedges to connect points for drawing lines without the aid of a parallel bar or machine scale.
Select one: a. Compass b. T-Square c. Triangles d. Divider Question 16 Complete Mark 1.00 out of 1.00
Flag question
Question text It is a film on which drawings or other printed materials are photographed at greatly reduced size for ease of storage.
Select one: a. Zoning b. Vellum
c. Microfilm d. Diazo Question 17 Complete Mark 1.00 out of 1.00
Flag question
Question text Diazo is drafting paper with translucent properties that is specially designed to accept pencil or ink.
Select one: True False Question 18 Complete Mark 1.00 out of 1.00
Flag question
Question text CAD is stands for Computer-Aided Drawing.
Select one: True False Question 19 Complete Mark 1.00 out of 1.00
Flag question
Question text It refers to the material on which you create drawings, such as paper or polyester film. Select one: a. Radio b. Media c. Film d. Drawing Question 20 Complete Mark 1.00 out of 1.00
Flag question
Question text Triangles
Answer can also be used as straightedges to connect points for drawing lines without the aid of a parallel bar or machine scale.
Question 21 Complete Mark 1.00 out of 1.00
Flag question
Question text It is a machine for photographically reproducing material.
Select one: a. Diazo Printing b. Photocopy printer c. Laser Printing d. Platform Printing Question 22 Complete Mark 1.00 out of 1.00
Flag question
Question text A _______ has a traversing arm that moves left and right across the table and a head unit that moves up and down the traversing arm.
Select one: a. auto machine b. track drafting machine c. head machine d. arm machine Question 23 Complete
Mark 1.00 out of 1.00
Flag question
Question text The parallel bar slides up and down a drafting board to allow you to draw vertical lines.
Select one: True False Question 24 Complete Mark 1.00 out of 1.00
Flag question
Question text _________are used to reduce or enlarge an object without having to make mathematical calculations or scale manipulations. Select one: a. Compass b. DIvider c. Proportional dividers d. Automatic Pencil Question 25 Complete Mark 0.00 out of 1.00
Flag question
Question text Referenced-file-mode systems it enables users to levergae other users' work as background data.
Select one: True False Question 26 Complete Mark 1.00 out of 1.00
Flag question
Question text A manual drafting machine is a machine that mounts to the table or board and has scales attached to an adjustable head that rotates for drawing angles.
Select one: True False Question 27 Complete Mark 1.00 out of 1.00
Flag question
Question text
If the auxiliary view does not lie uniformly on both sides of the reference line, then it is called Unsymmetrical Auxiliary Views. Select one: True False Question 28 Complete Mark 0.00 out of 1.00
Flag question
Question text If the auxiliary view lies uniformly on both sides of the reference line, then it is called _____________.
Select one: a. Symmetrical Auxiliary Views b. Unilateral Auxiliary Views c. Bilateral Auxiliary Views d. Primary Auxiliary Views Question 29 Complete Mark 1.00 out of 1.00
Flag question
Question text A scale is an instrument with a system of ordered marks at fixed intervals used as a reference standard in measurement.
Select one: True False Question 30 Complete Mark 1.00 out of 1.00
Flag question
Question text 1980
3D CAD tools were introduced in Answer Dassults.
by a partnership between IBM-
Question 31 Complete Mark 0.00 out of 1.00
Flag question
Question text A software that was introduced in the late 1960's to expedite engineering drawing process. Answer:
Computer Aided Design
Question 32 Complete Mark 1.00 out of 1.00
Flag question
Question text
If it lies on one side only of the reference line, then it is called ____________________. Select one: a. Primary Auxiliary Views b. Unilateral Auxiliary Views c. Symmetrical Auxiliary Views d. Bilateral Auxiliary Views Question 33 Complete Mark 1.00 out of 1.00
Flag question
Question text compass
A Answer
is an instrument used to draw circles and arcs.
Question 34 Complete Mark 1.00 out of 1.00
Flag question
Question text These are also available for specific requirements and drafting disciplines.
Select one: a. T-Square
b. Templates c. Divider d. Compass Question 35 Complete Mark 1.00 out of 1.00
Flag question
Question text Compass is also used in navigation to measure distance in nautical miles.
Select one: True False Question 36 Complete Mark 1.00 out of 1.00
Flag question
Question text If the auxiliary view does not uniformly lie on both sides of the reference line, then it is called ______________________. Select one: a. Bilateral Auxiliary Views b. Symmetrical Auxiliary Views
c. Primary Auxiliary Views d. Auxiliary Views Question 37 Complete Mark 1.00 out of 1.00
Flag question
Question text 3D Models
These images are called Answer any direction – X, Y or Z.
as they can be viewed and rotated in
Question 38 Complete Mark 0.00 out of 1.00
Flag question
Question text If the inclined surface is seen in the profile plane, then such an auxiliary new Top Auxiliary Vie
will be called Answer
Question 39 Complete Mark 1.00 out of 1.00
Flag question
Question text
.
Erasability is important because errors need to be corrected, and changes are frequently made.
Select one: True False Question 40 Complete Mark 1.00 out of 1.00
Flag question
Question text If the inclined surface is seen in the frontal plane, then such an auxiliary view Frontal Auxiliary View
will be called Answer
.
Question 41 Complete Mark 1.00 out of 1.00
Flag question
Question text French Curve
Irregular curves, commonly called Answer constant radii.
Question 42 Complete Mark 1.00 out of 1.00
, are curves that have no
Flag question
Question text The term automatic pencil refers to a pencil with a lead chamber that advances the lead from the chamber to the writing tip by the push of a button or tab when a new piece of lead is needed. Select one: True False Question 43 Complete Mark 0.00 out of 1.00
Flag question
Question text 2D software have been first developed way back in Answer
1970
.
Question 44 Complete Mark 1.00 out of 1.00
Flag question
Question text A divider is especially useful for large circles, but using one can be time consuming.
Select one: True False Question
45
Complete Mark 1.00 out of 1.00
Flag question
Question text Templates for drawing other shapes, such as ellipses, and for letters are also common.
Select one: True False Question 46 Complete Mark 1.00 out of 1.00
Flag question
Question text Diazo Printing
Answer uses a process that involves an ultraviolet light passing through a translucent original drawing to expose a chemically coated paper or print material underneath.
Question 47 Complete Mark 1.00 out of 1.00
Flag question
Question text It refers to the material on which you create drawings, such as paper or polyester film.
Select one: a. Media b. Film c. Radio d. Drawing Question 48 Complete Mark 1.00 out of 1.00
Flag question
Question text These images are called 3D models as they can be viewed and rotated in any direction – X, Y or Z.
Select one: True False Question 49 Complete Mark 1.00 out of 1.00
Flag question
Question text AutoDesk
Answer is one of the pioneering companies that has played a significant role in developing CAD software.
Question 50 Complete Mark 1.00 out of 1.00
Flag question
Question text Construction lines for layout and guidelines are very lightly drawn with a __________ lead. Select one: a. 7H or 3H b. 6H or 4H c. 5H or 4H d. 2H or 4H
Question 1 Complete Mark 1.00 out of 1.00
Flag question
Question text Drafting is a key element of the development process and is used during all the developmental stages of a mechanical design. Select one: True False Question 2 Complete Mark 1.00 out of 1.00
Flag question
Question text Construction lines are one of the ASME standard line types because they do represent a specific drawing feature and are not reproduced on the final drawing. Select one: True False Question 3 Complete Mark 1.00 out of 1.00
Flag question
Question text The purpose of engineering drawing is to convey information is also called Answer
objective fac
.
Question 4 Complete Mark 1.00 out of 1.00
Flag question
Question text A __________ language using lines, symbols, and notes to describe objects for manufacture or construction.
Select one: a. graphed
b. graphic c. graphing d. graph Question 5 Complete Mark 1.00 out of 1.00
Flag question
Question text A type of drafter that work from specifications, sketches, and rough drafts. Select one: a. Architectural drafters b. Cartographic drafter c. Automotive design drafter d. Civil drafters Question 6 Complete Mark 1.00 out of 1.00
Flag question
Question text ADDA is the acronym for the American Design Drafting Association and the American Digital Design Association. Select one:
True False Question 7 Complete Mark 1.00 out of 1.00
Flag question
Question text View ing-Pla
Answer lines are also thick and used to identify where a view is taken for view enlargements, removed views, or partial views Question 8 Complete Mark 1.00 out of 1.00
Flag question
Question text Softw are Piracy
The unauthorized copying of software is called Answer
Question 9 Complete Mark 1.00 out of 1.00
Flag question
Question text Drafting is a broad occupation. Select one: True False
.
Question 10 Complete Mark 1.00 out of 1.00
Flag question
Question text What is GIS stands for?
Select one: a. Graphic Information System b. Geographical Infotech System c. Geographic Information Section d. Geographic Information System
Question 11 Complete Mark 1.00 out of 1.00
Flag question
Question text It is a specialization of architectural drafting.
Select one: a. Automotive Design
b. Commercial Drafting c. Business Drafting d. Architectural Drafting Question 12 Complete Mark 1.00 out of 1.00
Flag question
Question text Sketching is freehand drawing without the aid of drafting equipment. Select one: True False Question 13 Complete Mark 1.00 out of 1.00
Flag question
Question text A type of drafter is a drafter associated with mechanical drafting for the manufacturing industry. Select one: a. Marine Drafter b. Mechanical Drafter c. Patent Drafter
d. Plumbing Drafter Question 14 Complete Mark 1.00 out of 1.00
Flag question
Question text Artistic ability is helpful in some specialized fields, as is knowledge of manufacturing and construction methods. Select one: True False Question 15 Complete Mark 1.00 out of 1.00
Flag question
Question text The most important communication tools that a company can possess is the engineering drafting. Select one: True False Question 16 Complete Mark 1.00 out of 1.00
Flag question
Question text
They are the drafters that build models of proposed landscape construction and prepare colored drawings for presentation to clients. Select one: a. Cartographers b. Automotive designers c. Geophysical drafters d. Landscape drafters Question 17 Complete Mark 1.00 out of 1.00
Flag question
Question text These lines that are half as thick as object lines for contrast Select one: a. Hidden lines b. Visible lines c. Extension lines d. Construction lines Question 18 Complete Mark 1.00 out of 1.00
Flag question
Question text It may specialize in a type of building, such as residential or commercial, or a construction material, such as reinforced concrete, masonry, steel, or timber. Select one: a. Cartographic Drafters b. Commercial Drafter c. Civil Drafter d. Architectural Drafters Question 19 Complete Mark 1.00 out of 1.00
Flag question
Question text A type of drafter that draw maps, diagrams, profiles, cross sections, directional surveys, and subsurface formations to represent geological or geophysical stratigraphy and locations of gas and oil deposits Select one: a. Geophysical drafters b. Electronic drafters c. Geological drafters d.
Civil drafters Question 20 Complete Mark 1.00 out of 1.00
Flag question
Question text Lines that are used to show and locate the centers of circles and arcs and to represent the center axis of a circular or symmetrical form Select one: a. Hidden Lines b. Visible Lines c. Construction Lines d. Centerlines Question 21 Complete Mark 1.00 out of 1.00
Flag question
Question text A lines created using a separate format can be removed easily or set so they do not display or plot when the layout work is finished.
Select one: a. Hidden Line b.
Centerlines c. Visible Line d. Construction Line Question 22 Complete Mark 1.00 out of 1.00
Flag question
Question text Engineering d
Answer uses an extensive set of conventions to convey information very precisely, with very little ambiguity. Question 23 Complete Mark 1.00 out of 1.00
Flag question
Question text Surface finish it specifies the surface quality of the item . Select one: True False Question 24 Complete Mark 1.00 out of 1.00
Flag question
Question text Gasperd Monge is usually considered the "father of descriptive geometry".
Select one: True False Question 25 Complete Mark 1.00 out of 1.00
Flag question
Question text It may prepare separate detailed site plans, grading and drainage plans, lighting plans, paving plans, irrigation plans, planting plans, and drawings and details of garden structures Select one: a. Landscape drafters b. Patent Drafters c. Marine Drafters d. Mechanical Drafters Question 26 Complete Mark 1.00 out of 1.00
Flag question
Question text Answer
sketching
Question 27 Complete
is also used in job shops where one-of-a-kind products are made
Mark 1.00 out of 1.00
Flag question
Question text Answer
drafter
is a man or woman employed in the drafting profession.
Question 28 Complete Mark 1.00 out of 1.00
Flag question
Question text Isometric is a means of representing a three-dimensional object in two dimensions Select one: True False Question 29 Complete Mark 1.00 out of 1.00
Flag question
Question text Sketching refers to all letters and numbers on drawings and r...