Pdfcoffee - ExamenExamen para pasar algunos de test de oracle 1z0-* PDF

Preview

Summary

ExamenExamen para pasar algunos de test de oracle 1z0-*...

Description

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-2L and X7-2 Assessment (Answer all questions in this section) 1. Which command accesses the shell where hwdiag can be accessed?

Mark for Review (1) Points

access /sp/diag/shell access /sp/hwdiag start /sp/hwdiag start /sp/diag/shell Correct ! 2. Which PCIe slot is used for the HBA that controls the 8 disk slots of the Oracle Server X7-2?

Mark for Review (1) Points

2 1 3 4 Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 3. Which direction is the Oracle X7-2L and X7-2 cooled?

Mark for Review (1) Points

back to front top to bottom front to back bottom to top Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2".

4. How many Estes-INT HBAs are needed to support all 12 disk bays on the Oracle Server X7-2L?

Mark for Review (1) Points

3 2 1 4

Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 5. What chip is used for the X7-2 and X7-2L Service Processor?

Mark for Review (1) Points

AST2100 AST2000 Pilot 3 Pilot 4 Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2".

Page 1 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-2L and X7-2 Assessment (Answer all questions in this section) 6. Which new hwdiag command displays SPI based FPGA registers?

Mark for Review (1) Points

hwdiag cpld spi_global_reg hwdiag cpld log read hwdiag power pciepoktest

hwdiag cpu pirom_info Correct ! 7. Which is the maximum memory supported by the Oracle Server X7-2L and X7-2 using 64 MB DIMMs?

Mark for Review (1) Points

1.5 TB 2 TB 500 MB 768 MB Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 8. Where are the M.2 flash module supported?

Mark for Review (1) Points

On the Oracle Server X7-2L with both modules on the same mezzanine On the Oracle Server X7-2L off a SATA riser Only on the Oracle Server X7-2L Only on the Oracle Server X7-2 Correct ! 9. How many of the 12 disk bay slots on the Oracle Server X7-2L supports NVME disks?

Mark for Review (1) Points

8 12 6 10 Correct ! 10. Which devices on the Oracle Server X7-2L can use RSTe from BIOS?

Mark for Review (1) Points

SAS disk Drives SATA M.2 flash modules NVME disk drives

This is not currently supported Correct !

Previous

Page 2 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-2L and X7-2 Assessment (Answer all questions in this section) 11. How many processors are supported by the Oracle Server X7-2L and X7-2?

Mark for Review (1) Points

2 only 1 only 2 or 4

Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 12. In which document can you find the LED Sequence and states?

Mark for Review (1) Points

installation guide ILOM User’s manual administration guide Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 13. Which server is the predecessor to the Oracle Server X7-2L?

Mark for Review (1) Points

SPARC S7-2 Oracle Server X5-2 SPARC T5-2 Oracle Server X6-2L Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 14. Which OS is NOT supported or pending at the initial release of the Oracle Server X7-2L and X7-2?

Mark for Review (1) Points

Oracle Linux 7 Oracle Solaris 11.3 SuSE Linux Enterprise Server Oracle VM 3.4 Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 15. How many disks does each NVME switch card support?

Mark for Review (1) Points

4 3 1 2 Correct !

Previous

Page 3 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-2L and X7-2 Assessment

(Answer all questions in this section) 16. Which is a BIOS security feature that is available on the Oracle Server X7-2L and X7-2?

Mark for Review (1) Points

BootGuard Endpoint Security Suite Secure Boot ProtectTools Security Manager Correct ! 17. How many external PCIe Gen3 slots are in the X7-2L?

Mark for Review (1) Points

5 11 12 8 Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 18. Which is the height of the Oracle Server X7-2L?

Mark for Review (1) Points

2U 4U 1U 3U Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 19. Which diagnostic commands have been removed?

Mark for Review (1) Points

SAS expander HWDIAG utilities hwdiag power pciepoktest ILOM’s i2ctool UEFIDIAG commands Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2".

20. How many USB3.0 ports exist on the X7-2 and X7-2L servers?

Mark for Review (1) Points

2 - 1x rear, 1x internal 4 - 2x front, 2x rear 3 - 1x front, 1x rear, 1x internal 6 - 2x front, 2x rear, 2x internal Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2".

Previous

Page 4 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-2L and X7-2 Assessment (Answer all questions in this section) 21. Which are the ILOM versions that are going to release with the Oracle Servers X7-2L and X7-2?

Mark for Review (1) Points

4.0.0.10 / 4.0.0.12 4.0.0.15 / 4.0.0.17 4.0.0.25 / 4.0.0.27

Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 22. How many NVME switch cards are needed to support all 8 NVME disks on the Oracle Server X7-2?

Mark for Review (1) Points

2 NVME switch cards are not used on the Oracle Server X7-2

4 8 Correct ! 23. Which is the Ethernet configuration supported on the Oracle Server X7-2?

Mark for Review (1) Points

(2) 10-GbE ports and (2) 25-GbE ports (2) 10-GbE ports or (2) 25-GbE port (4) 10-GbE ports (4) 25-GbE ports Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 24. Which server can mix NVME drives and SAS drives and which server supports NVME drives without NVME switch cards? Choose the correct pair.

Mark for Review (1) Points

X7-2 / X7-2L X7-2 / X7-2 X7-2L / X7-2 X7-2L / X7-2L Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2". 25. In which document can you find information on backup, restore, or reset of firmware configurations?

Mark for Review (1) Points

installation guide administration guide service manual ILOM User’s manual Incorrect. Please refer back to the lessons “Oracle Servers X7-2L and X7-2".

Previous

Page 5 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment

Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-8 Assessment (Answer all questions in this section) 26. How many DPCC (Dual PCIe Card Carrier) are installed in an Oracle Server X7-8?

Mark for Review (1) Points

16 8 12 4 Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 27. The chassis mode conversion (4-socket vs. 8-socket) requires host power of both sides to be completely off.

Mark for Review (1) Points

True False Correct ! 28. In 4-socket mode, the SPs running on both SMODs will present independent ILOM interfaces to user?

Mark for Review (1) Points

True False Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 29. The BIOS on Oracle Server X7-8 supports which profiles? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers) SuperCluster

GPS Exalogic Exadata Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 30. Which are the memory population rules for the Oracle Server X7-8? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers) Populate “furthest first, closest last” from socket on each channel All memory banks should have symmetrical loading All channels should be loaded for maximum performance Minimum system DIMM count is one Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8".

Previous

Page 6 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-8 Assessment (Answer all questions in this section) 31. Which components are cold service CRUs?

Mark for Review (1) Points

CMOD, SMOD, PCIe cards, internal mini-SAS cabling, DIMMs, power supplies CMOD, SMOD, PCIe cards, fan modules, DIMMs, power backup SCAP CMOD, SMOD, PCIe cards, internal mini-SAS cabling, DPCCs, power back SCAP CMOD, SMOD, PCIe cards, internal mini-SAS cabling, DIMMs, power backup SCAP

Correct ! 32. Where do you find information about diagnostics and troubleshooting? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers) x86 Servers Diagnostics and Troubleshooting Guide X7-8 Service Manual ILOM User’s Guide Security Guide Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 33. Which are the chassis cooling requirements in Oracle Server X7-8? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers) Each DPCC must be installed (with or without LP cards). Empty slots must have a filler panel Each SMOD bay must have an SMOD CPUs must have a heat-sink Each drive bay must have a storage device or a drive filler Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 34. How many cooling zones does the Oracle Server X7-8 have?

Mark for Review (1) Points

4 3 2 5 Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 35. Which power configuration is used in the Oracle Server X7-8? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers)

2+2 configuration in 4S mode Two 1+1 configuration in 8s mode 2+2 configuration in 8S mode 1+1 configuration in 4S mode Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8".

Previous

Page 7 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-8 Assessment (Answer all questions in this section) 36. Which components are hot-swappable in the Oracle Server X7-8?

Mark for Review (1) Points

PSUs, fans, DPCC (Dual PCIe Card Carriers), HBA PSUs PSUs, fans, DPCC (Dual PCIe Card Carriers) PSUs, fans Correct ! 37. Which components are available in 4-socket mode (side A)? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers) PSU2-3 DPCC0-3 Choice SMOD0 CMOD4-7

Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 38. Which command is used for checking the status if MBUS?

Mark for Review (1) Points

hwdiag status mbus hwdiag cpld mbus check status mbus hwdiag check mbus Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 39. What is the Backup #1 Container in Oracle Server X7-8 (4-socket B-side)?

Mark for Review (1) Points

/SYS/FIM /SYS/CMOD1 /SYS/SMOD1/MB /SYS/MIDPLANE Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 40. Which are the PSU redundant groups in the Oracle Server X7-8?

Mark for Review (1) Points

PSU 0 and 1 = group for system B side (SMOD1, CMODs 4-7) PSU 2 and 3 = group for system A side (SMOD0, CMODs 0-3) PSU 0 and 2 = group for system B side (SMOD1, CMODs 4-7) PSU 1 and 3 = group for system A side (SMOD0, CMODs 0-3) PSU 0 and 1 = group for system A side (SMOD1, CMODs 4-7) PSU 2 and 3 = group for system B side (SMOD0, CMODs 0-3) PSU 0 and 1 = group for system B side (SMOD1, CMODs 4-7) PSU 2 and 3 = group for system A side (SMOD0, CMODs 0-3) Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8".

Previous

Page 8 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below.

This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. Oracle Server X7-8 Assessment (Answer all questions in this section) 41. What is the maximum DIMM count in the Oracle Server X7-8?

Mark for Review (1) Points

96 16 64 32 Correct ! 42. In 8-socket mode, the SP on SMOD1 will be hold in reset, no ILOM user interface available on it?

Mark for Review (1) Points

True False Correct ! 43. The Oracle Server X7-8 is available in which configurations?

Mark for Review (1) Points

One 8-socket or four 1-socket servers One 8-socket or two 4-socket servers Two 4-socket servers only One 8-socket or two 4-socket servers or four 1-socket servers Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8". 44. In 4-socket configurations which UPI port is disabled?

Mark for Review (1) Points

Port 2 Port 1

Port 3 Port 0 Correct ! 45. Which diagnostics tools are available in Oracle Server X7-8? (Select all that apply)

Mark for Review (1) Points

(Choose all correct answers) Hwdiag U-Boot CheckHW UEFIdiag Incorrect. Please refer back to the lesson “Engineering TOI: Oracle Server X7-8".

Previous

Page 9 of 19

Next Summary

Test: Oracle X86 Server Installation Specialist Online Assessment Review your answers, feedback, and question scores below. This assessment test is the final component of the X86 Server Installation Specialist training. This assessment will allow you to test your knowledge of the information learned from the X86Server Installation Specialist guided learning path. Passing with a >80% score from this assessment makes you eligible to become an X86 Server Installation Specialist. EIS Installation Best Practices Online Assessment (Answer all questions in this section) 46. What is the purpose for the Operational Handover step in the EIS Methodology?

Mark for Review (1) Points

Documents the installation and configuration of Customer's system(s) Documents how to use the EIS documentation and standards Used to negate responsibility for any ongoing System issues Perform system testing and diagnostics Incorrect! Please review the course content and try again.

47. What are two cautions that should be acknowledged when acclimatizing a system?

Mark for Review (1) Points

(Choose all correct answers) The maximum positive or negative temperature gradient that is permitted for multi-layerboards is approximately 2° C (4° F) per hour. Avoid unpacking items inside the computer centre (dust/dirt contaminating filters etc.) Powering ON the system will speed the acclimatization process as the heat from the system will accelerate its warming Once powered on the temperature is no longer an issue, as internal cooling systems commence Incorrect! Please review the course content and try again. 48. What do EIS deliverables define?

Mark for Review (1) Points

EIS deliverables are the Customer Support Identifiers that customers use for field delivery service after an installation has completed EIS deliverables are the documents that are left behind with customers after an installation service is performed EIS deliverables describe detailed process steps for each phase of the installation service EIS deliverables give a high level description of the scope of the EIS activities for each product or product family Incorrect! Please review the course content and try again. 49. What are three types of configuration information typically documented in an Installation Configuration P...