Title | Puesrta automática Fermator user manual vvvf4 |
---|---|
Course | Proyectos |
Institution | Universidad Católica Boliviana San Pablo |
Pages | 1 |
File Size | 113.7 KB |
File Type | |
Total Downloads | 64 |
Total Views | 182 |
Manual de operación e instalación de puertas automáticas para elevadores o ascensores. Descripción del material necesario para el montaje de las puertas, y el mantenimiento....
D
R
E
PHOTOCELL
COMMISSIONING AND TEST PROCEDURE 1- Take the car to the landing level. Connect 220V AC to power supply input (5-7 terminals) of board. Do not forget to connect earth connection (terminal 6). 2- Set 4 dip-switches on the board according to door specifications. 3- Switch ON supply and see OK led is flashing. 4- To start learninig procedure push program button (51). If door is open, door will close slowly and will open if door is close door will open slowly and will close. This process must be completed succesfully. Otherwise system never works properly. 5- After completing Learninig process, push TEST button (50) shortly and test door's operations. Operational setting will be the same as normal operation. 6- After completing Test process succesfully, connect door command inputs coming from lift control panel to input terminals (8-CLOSE, 10-COMMON, 12-OPEN). Inputs voltage must be 12V-220V AC/DC. Test door by activating door open and close commands from controller.
D
FOR MORE INFO, PLEASE READ FERMATOR VVVF-4+ USER MANUAL
DOOR OPEN SIGNAL INPUTS
C
GREEN
White Black Black White
17 18 19 20
SLOW CLOSE RE-OPEN FLOOR LEVEL
COMMON OPEN
230V AC
EARTH / PE
NEUTRAL / N-Mp
+
CLOSE SPEED
AUTOADJUSTMENT (PROGRAM)
53
51
8 CLOSE 9 +12V 10 COMMON 11 0V 12 OPEN 7
F
6
GND
5
N
C
....OK!
-
+
OBSTRUCTION
40
OPEN SPEED
39 38 37
PHOTOCELL
DIP-SWITCH
ON
-
+
SAFETY
54
36 35
OFF 1
CLOSED
2 3 4
34 33 32
DIP-SWITCH SETTINGS OFF
SUPPLY
PHASE / L1-R
-
STATUS
ON
OPENED
B
31
1 : ON Single Input Signal (8-10) OFF Double Input Signal (8-10-12)
INPUTS
CLOSE
SIGNAL INPUTS
PRIORITY INPUTS
+12V COM
25 21 26
50
41
RECEIVER
23
52
TEST BUTTON
EMITTER
POWER SWITCH
B
TEST
PHOTOCELL FOTOSEL
YELLOW
V+ TX RX V-
SERIAL PORT
13 14 15 16
30
2 : ON Automatic Landing Door OFF Manual Landing Door
55
3 : ON Left&Central Opening OFF Right Opening 4 : ON Automatic Self Control (MASTER) OFF Manual Control (SLAVE)
ENCODER ENKODER
56
VVVF-4+
MOTOR
Fermator
M
A
A
Title Size
FERMATOR VVVF-4+ DOOR BOARD CONNECTION DIAGRAM Number
A3 Date: File:
16-Apr-2014 Sheet of E:\PROJELER\PROTEL\OZEL\OZEL.ddb Drawn By:
Revision...