Title | Trail software commands |
---|---|
Course | Minor Thesis B (Part-Time) |
Institution | Victoria University |
Pages | 7 |
File Size | 217.5 KB |
File Type | |
Total Downloads | 16 |
Total Views | 146 |
Trail software commands ...
Mec echanical Desktop 4 Power P ack Co Comm ands This document lists the additional commands/features that are accessible when Mechanical Desktop® 4 Power Pack is installed (or with the 30-day trial). All standard Mechanical Desktop 4 commands are available in Mechanical Desktop 4 Power Pack. Mechanical Deskt op 4 Pow er Pack
Command Name AM2DHIDE
Description Hides invisible edges.
AM2DHIDEDIT
Edits invisible/hidden edges.
AMADJRINGS
Creates adjusting rings (Standard Part).
AMANALYSEDWG
Analyses configuration of the current file.
AMASSOHATCH
Suits an existing hatch to a changed contour.
AMAUTOCLINES
Draws predefined construction lines on a selected drawing element.
AMAUTODETAIL
Creates an external detail drawing (Xref) of selected elements from an assembly drawing.
AMBASICPLANES
Creates a new part with non parametric work planes on X, Y, and Z axes that intersect at a work point based on a point you specify.
AMBEARCALC
Creates a bearing calculation.
AMBHOLE
Creates blind holes (Standard Part).
AMBOLT
Creates bolts (Standard Part).
AMBREAKATPT
Breaks a line, polyline or spline on a shown point.
AMBROUTLINE
Draws a special spline to show the break out borders.
AMCAM
Creates a cam plate.
AMCAMCONF
Cam configurations.
AMCAMCRCAM
Makes a cam from a graph.
AMCAMCRGRAPH
Makes a graph from a cam.
AMCAMGRAPH
Calculates Velocity and Accelerate graphs.
AMCAMNC
Calculates a NC data file from an existing cam drawing.
AMCAMTRANS
Creates movement sections for the cam calculation.
AMCAPTUREUCS
Saves a block that contains current UCS and sketch plane data.
AMCENCRANGLE
Draws a centerline cross with an angle.
AMCENCRCORNER
Draws a centerline cross in a corner.
AMCENCRFULLCIRCLE
Draws a centerline cross on a full circle.
AMCENCRHOLE
Draws a centerline cross with a hole.
AMCENCRINHOLE
Draws a centerline cross in a hole.
1
Mechanical Deskt op 4 Pow er Pack
Command Name
Description
AMCENCROSS
Draw a centerline cross.
AMCENCRPLATE
Draws a centerline cross on a plate.
AMCENINBET
Draws a centerline between two edges.
AMCENTERHOLE
Creates centerholes (Standard Part).
AMCENTLINE
Creates centerlines.
AMCHAINDRAW
Draws chain or belt links (Standard Part).
AMCHAINLENGTHCAL
Calculates the length of a chain.
AMCHAM2D
Draws a 2D chamfer.
AMCHGTSC
Changes the scale in the title block.
AMCLINEL
Locks or unlocks the construction line layer.
AMCLINEO
Freezes/Off or thaws/On the construction lines layer.
AMCLOSINGCOMP
Inserts a closing component. (Standard Part).
AMCONFIG
Configures Power Pack features.
AMCONICPIN
Creates conical pins (Standard Part).
AMCONSTLINES
Draws a construction line.
AMCONSTSWI
Switches between ray and xline toggle.
AMCONTIN
Searches for the inside contour border.
AMCONTOUT
Searches for the outside contour border.
AMCONTRACE
Searches for the contour trace.
AMCONVDWG
Converts the current drawing by opening a conversion control file.
AMCOPYM
Makes several copies of a selection.
AMCOPYRM
Allows the user to copy, rotate and move at one time.
AMCOTTERPIN
Creates cotter pins (Standard Part).
AMCOUNTB
Creates counterbores (Standard Part).
AMCOUNTS
Creates countersinks (Standard Part).
AMCRIVET
Creates countersink rivets (Standard Part).
AMCUTPLNLINE
Creates a cutting plane line.
AMCYLPIN
Creates cylindrical pins (Standard Part).
AMDATUMID
Creates a datum identifier symbol.
AMDATUMTGT
Creates a datum target symbol.
AMDEFLINE
Creates a deflection line.
AMDETAIL
Creates a detail view.
AMDRBUSH
Creates a drill bushing (Standard Part).
AMDRBUSHHOLE
Creates a drill bushing with holes (Standard Part).
2
Mechanical Deskt op 4 Pow er Pack
Command Name
Description
AMEQUATEDIT
Opens the Equation editor.
AMERASEALLCL
Erases all construction lines.
AMERASECL
Erases selected construction lines.
AMEXTHREAD
Creates external threads (Standard Part).
AMFEA2D
Calculates stress and deformation in a plane for plates with a given thickness or in a cross-section with individual forces and stretching loads.
AMFEA3D
Determines the resistance capability of a 3D-object put under static load.
AMFEATID
Creates a feature identifier symbol.
AMFILLET2D
Creates a fillet.
AMFITSLIST
Command to insert a fits list from a placed dimensioning.
AMGROOVE
Creates retaining rings or circlips (Standard Part).
AMHATCH_135_11
Creates a 135 degrees and 11mm/0.4inch hatch.
AMHATCH_135_2
Creates a 135 degrees and 2.7mm/0.12inch hatch.
AMHATCH_135_4
Creates a hatch with 135 degrees and 4.7mm/0.19 inches.
AMHATCH_45_13
Creates a hatch with 45 degrees and 13mm/0.5 inches.
AMHATCH_45_2
Creates a 45 degrees and 2.5mm/0.1inch hatch.
AMHATCH_45_5
Creates a hatch with 45 degrees and 5mm/0.22 inches.
AMHATCH_DBL
Creates double hatch.
AMHELP
Access the Power Pack help.
AMHOLECHART
You can automatically create a table with X and Y hole data from an origin you specify.
AMINERTIA
Allows you to calculate the moment of inertia.
AMINERTIAPROF
Defines profile section for a deflection line (moment of inertia).
AMINTHREAD
Creates internal threads (Standard Part).
AMJOIN
Allows you to join different entities.
AMLANGCONV
Translates text strings into another language.
AMLAY
Manages Layer/Layer Group control .
AMLAYINVO
Switches invisible lines on or off.
AMLAYMOVE
Moves lines to another layer.
AMLAYMOVEPL
Moves lines to the parts layer.
AMLAYMOVEWL
Moves lines to working layer.
AMLAYPARTO
Thaws or freezes the parts layer.
AMLAYPARTREFO
Sets the part reference layer on or off.
3
Mechanical Deskt op 4 Pow er Pack
Command Name
Description
AMLAYRESET
Sets all layers back.
AMLAYTIBLO
Switches the title block and border layer on or off.
AMLAYVISENH
Gives the user visible control of the layer groups.
AMLAYVPO
Switches the viewport layer on or off.
AMLGMOVE
Moves lines or blocks to another layer group.
AMLIBRARY
Creates a library for drawings.
AMLUBRI
Creates lubricators (Standard Part).
AMMASK
Creates a mask file for a parts list printout.
AMMCONTV
Shows the contour.
AMNAILPIN
Creates nail pins (Standard Part).
AMNOTE
Creates notes in the drawing with a leader.
AMNUT
Creates nuts (Standard Part).
AMOBJPROP
Shows the properties of the selected object.
AMOBJPURGE
Clears unreferenced symbols from the drawing.
AMOBLONGB
Creates oblong blind holes (Standard Part).
AMOBLONGT
Creates oblong through holes (Standard Part).
AMOFFSET
Offsets an object.
AMPIN
Creates pins (Standard Part).
AMPLBEAR
Creates plain bearings (Standard Part).
AMPLOTDATE
Plots the date in the title.
AMPLRIVET
Creates plain rivets (Standard Part).
AMPLUG
Creates plugs (Standard Part).
AMPOWERCOPY
Automatically copies related objects (such as an entire screw connection).
AMPOWEREDIT
Changes or applies Power Dimension functions to power or standard parametric and reference dimensions.
AMPOWERERASE
Automatically cleans up all associated objects when you erase intelligent objects.
AMPOWERRECALL
Repeats the last edit to the object you select.
AMPOWERSNAP
Sets object snap modes, polar snap, and filters for object snaps.
AMPOWERVIEW
Automatically generates a new view from a side view in 2D standard parts.
AMPROJECT2PLN
Projects objects onto a plane.
AMPROJO
Sets the projection on or off.
AMPSNAP1
Sets user defined snap settings.
4
Mechanical Deskt op 4 Pow er Pack
Command Name
Description
AMPSNAP2
Sets user defined snap settings.
AMPSNAP3
Sets user defined snap settings.
AMPSNAP4
Sets user defined snap settings.
AMPSNAPCEN
Snaps to the rectangle center.
AMPSNAPCOORDO
Displays or hides the coordinates of the current cursor location while dragging the mouse cursor.
AMPSNAPFILTERO
Switches the entity filter on/off.
AMPSNAPMID
Snaps to the middle of two points.
AMPSNAPREF
Snaps to a reference point.
AMPSNAPREL
Snaps to a relative point.
AMPSNAPVINT
Snaps a virtual intersection point of two lines.
AMPSNAPZO
Turns the On/Off snap for the z-coordinate.
AMRECTANG
Rectangle function with additional options.
AMREFCLOSE
Saves reference edits.
AMREFCOPY
Adds an additional object to a block.
AMRESTOREUCS
Lets you select a saved UCS block to restore its saved UCS and sketch plane.
AMREV
Switches the revision list on or off.
AMREVLINE
Inserts a revision list into a drawing or adds an additional revision line to an existing revision list.
AMREVUPDATE
Updates the revision lists.
AMRIVET
Creates rivets (Standard Part).
AMROLBEAR
Creates rolling bearings (Standard Part).
AMSCALEXY
Allows scaling in the x and y direction.
AMSCAREA
Creates a user defined viewport in model mode.
AMSCMONITOR
Scale within a viewport.
AMSCREW
Creates screws (Standard Part).
AMSCREWCON
Insert a complete screw connection (Standard Part).
AMSCREWMACRO
Insert user defined screw connections (Standard Part).
AMSCRIPT
Generates a script.
AMSEALRING
Creates sealing rings (Standard Part).
AMSEALS
Creates seals (Standard Part).
AMSETUPDWG
Sets up the drawing.
AMSHAFT2D
Create shafts.
AMSHAFT3D
Creates a 3D shaft.
5
Mechanical Deskt op 4 Pow er Pack
Command Name
Description
AMSHAFTCALC
Calculates a shaft.
AMSHAFTEND
Creates a shaft break.
AMSHAFTKEY
Creates parallel or woodruff keys (Standard Part).
AMSHAFTLNUT
Creates shaft lock nuts (Standard Part).
AMSHIMRING
Creates shim rings (Standard Part).
AMSHOWSKETCH
Highlights all valid sketch objects on the current UCS or sketch plane.
AMSIMPLEWELD
Creates seam and fillet simple weldings.
AMSPRING
Creates a spring (Standard Part).
AMSPROCKET
Draws a sprocket or a pulley (Standard Part).
AMSTDHOLE
Creates holes (Standard Part).
AMSTDPDB
Shows the database editor.
AMSTDPDBEDIT
Adds edits to the database editor.
AMSTDPLIB
Shows all available standard parts (Standard Part).
AMSTDPREP
Changes the representation of standard parts.
AMSTLSHAP
Inserts standard girders (Standard Part).
AMSTYLEITAL
Changes the text style to italic.
AMSTYLESIMP
Changes the text style to simplex.
AMSTYLESTAND
Changes the text style to standard.
AMSTYLETXT
Changes the text style to txt.
AMSYMLINE
Draws a symmetrical line.
AMTABLET
Determines tablet configuration.
AMTBFULL
Displays the Mechanical Express toolbar at the right side and the Snap toolbar at the left side.
AMTBLEFT
Displays the Mechanical Express toolbar at the left side.
AMTBRIGHT
Displays the Mechanical Express toolbar at the right side.
AMTEXT5
Places multiline text in the respective sizes (in current drawing units).
AMTEXT7
Places multiline text in the respective sizes (in current drawing units).
AMTEXTCENTER
Centers text within a user defined area.
AMTEXTFIT
Fits text within a user defined area.
AMTEXTRIGHT
Places text right justified.
AMTHOLE
Creates through holes (Standard Part).
AMTHRBHOLE
Creates threaded blind holes (Standard Part).
6
Mechanical Deskt op 4 Pow er Pack
Command Name
Description
AMTHREADEND
Creates thread ends (Standard Part).
AMTITLE
Inserts a title or a border.
AMTRCONT
Traces the contour.
AMUBHOLE
Draws user defined blind holes.
AMUCOUNTB
Draws user defined counterbore holes.
AMUCOUNTS
Draws user defined countersinks.
AMUCSPERP
Creates an UCS and optional sketch plane perpendicular to the end of a line.
AMUNDERCUT
Creates undercuts (Standard Part).
AMUOBLONGB
Draws user defined oblong blind holes.
AMUOBLONGT
Draws user defined oblong through holes.
AMUSERHATCH
Inserts a user defined hatch.
AMUTHOLE
Draws user defined through holes.
AMVARIODB
Connects to a database.
AMVIEWALL
Zooms viewports with a user defined window.
AMVIEWCEN
Shows the center of the drawing title.
AMVIEWLL
Zooms predefined lower left quarter of the drawing.
AMVIEWLR
Zooms predefined lower right quarter of the drawing.
AMVIEWUL
Zooms the predefined upper left quarter of the drawing.
AMVIEWUR
Zooms the predefined upper right quarter of the drawing.
AMVPORT
Creates a viewport with user defined options.
AMVPORTAUTO
Creates a viewport automatically.
AMVPZOOMALL
Zooms all viewports.
AMWASHER
Creates washers (Standard Part).
AMXREFSET
Controls the representation of xrefs.
AMZIGZAGLINE
Draws a zig-zag line.
AMZOOMVP
Zooms by viewport.
Autodesk, the Autodesk logo, AutoCAD, and Mechanical Desktop are registered trademarks, and the Design Your World logo is a trademark, of Autodesk, Inc., in the USA and/or other countries. Genius is a trademark of Genius CAD Software GmbH and CoKG licensed to Autodesk, Inc., for limited use in connection with specified products. All other brand names, product names, or trademarks belong to their respective holders. © Copyright 1999 Autodesk, Inc. All rights reserved.
7...