Cement clinker - Cliners are not not cleaners. PDF

Title Cement clinker - Cliners are not not cleaners.
Author Anonymous User
Course Bio Inorganic Chemistry Lec
Institution Adamson University
Pages 4
File Size 225.2 KB
File Type PDF
Total Downloads 105
Total Views 168

Summary

Cliners are not not cleaners....


Description

Cement clinker From Wikipedia, the free encyclopedia

Jump to navigationJump to search

Typical clinker nodules

Hot clinker

Cement clinker is a solid material produced in the manufacture of Portland cement as an intermediary product. Clinker occurs as lumps or nodules, usually 3 millimetres (0.12 in) to 25 millimetres (0.98 in) in diameter. It is produced by sintering (fusing together without melting to the point of liquefaction) limestone and aluminosilicate materials such as clay during the cement kiln stage. Contents       

1Composition and preparation 2Uses 3Clinker grinding aids 4Conversion to cement paste 5Contribution to global warming 6See also 7References

Composition and preparation[edit] Clinker consists of various calcium silicates including alite and belite. Tricalcium aluminate and calcium aluminoferrite are other common components. These components are often generated in situ by heating various clays and limestone.[1] Portland cement clinker is made by heating a homogeneous mixture of raw materials in a rotary kiln at high temperature . The products of the chemical reaction aggregate together at their sintering temperature, about 1,450 °C (2,640 °F). Aluminium oxide and iron oxide are present only as a flux to reduce the sintering temperature and contribute little to the cement strength. For special cements, such as low heat (LH) and sulfate resistant (SR) types, it is necessary to limit the amount of tricalcium aluminate formed. The major raw material for the clinker-making is usually limestone mixed with a second material containing clay as a source of alumino-silicate. Normally, an impure limestone which contains clay or silicon dioxide (SiO2) is used. The calcium carbonate (CaCO3) content of these limestones can be as low as 80%. Second raw materials (materials in the rawmix other than limestone) depend on the purity of the limestone. Some of the second raw materials used are: clay, shale, sand, iron ore, bauxite, fly ash and slag. The clinker surface and its reactions in different electrolytic solutions are investigated by scanning electron microscope and atomic force microscopy.[2]

Uses[edit] Portland cement clinker is ground to a fine powder and used as the binder in many cement products. A little gypsum is sometimes added. It may also be combined with other active ingredients or chemical admixtures to produce other types of cement including:   

ground granulated blast furnace slag cement pozzolana cement silica fume cement

Clinker, if stored in dry conditions, can be kept for several months without appreciable loss of quality. Because of this, and because it can easily be handled by ordinary mineral handling equipment, clinker is traded internationally in large quantities. Cement manufacturers purchasing clinker usually grind it as an addition to their own clinker at their cement plants. Manufacturers also ship clinker to grinding plants in areas where cement-making raw materials are not available.

Clinker grinding aids[edit] Gypsum is added to clinker primarily as an additive preventing the flash settings of the cement, but it is also very effective to facilitate the grinding of clinker by preventing agglomeration and coating of the powder at the surface of balls and mill wall. Organic compounds are also often added as grinding aids to avoid powder agglomeration. Triethanolamine (TEA) is commonly used at 0.1 wt. % and has proved to

be very effective. Other additives are sometimes used, such as ethylene glycol, oleic acid, and dodecyl-benzene sulfonate.[3]

Conversion to cement paste[edit] Upon treatment with water, clinker reacts to form a hydrate called cement paste. Upon standing the paste polymerizes as indicated by its hardening.

Contribution to global warming[edit] As of 2018, cement production contributed about 8% of all carbon emissions worldwide, contributing substantially to global warming. Most of those emissions were produced in the clinker manufacturing process.[4]

See also[edit] 

Environmental impact of concrete

References[edit] 1.

^ Siegbert Sprung "Cement" in Ullmann's Encyclopedia of Industrial Chemistry, 2012 Wiley-VCH, Weinheim. doi:10.1002/14356007.a05_489.pub2

2.

^ Ferrari, L. (2012). "Reaction of clinker surfaces investigated with atomic force microscopy". Construction and Building Materials. 35: 92–96. doi:10.1016/j.conbuildmat.2012.02.089.

3.

^ Sohoni, S.; R. Sridhar; G. Mandal (1991). "Effect of grinding aids on the fine grinding of limestone, quartz and portland cement clinker". Powder Technology. 67 (3): 277– 286. doi:10.1016/0032-5910(91)80109-V.

4.

^ Rodgers, Lucy (2018-12-17). "The massive CO2 emitter you may not know about". BBC News. Retrieved 2018-12-17.

Categories:



Cement Concrete Limestone Climate forcing

 

Article Talk

  

Navigation menu     

Not logged in Talk Contributions Create account Log in

  

Read Edit View history

Search  Main page  Contents  Current events  Random article  About Wikipedia  Contact us  Donate Contribute  Help  Learn to edit  Community portal  Recent changes  Upload file Tools  What links here  Related changes  Special pages  Permanent link  Page information  Cite this page  Wikidata item Print/export  Download as PDF  Printable version In other projects  Wikimedia Commons Languages  ‫العربية‬  Deutsch  Español  Français  한국어  日本語  Português  Русский  Türkçe

14 more Edit links  This page was last edited on 31 August 2020, at 13:25 (UTC).  Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization....


Similar Free PDFs