Title | Mastercam 2017Readme |
---|---|
Author | Juan Carlos Castro Sandoval |
Course | Industrial engineering |
Institution | ITM University |
Pages | 50 |
File Size | 992.5 KB |
File Type | |
Total Downloads | 20 |
Total Views | 120 |
Instrucciones sobre Mastercam...
MASTERCAM 2017 README May 2016
Mastercam 2017 ReadMe — Introduction
INTRODUCTION Please review this ReadMe for last-minute product information about Mastercam 2017. Report any problems to [email protected].
2
Mastercam 2017 ReadMe — Mastercam 2017 Issues
MASTERCAM 2017 ISSUES This release of Mastercam 2017 features several bug fixes including the following list: Category
Description
Number
Interface
Updating the work offset in an operation and then canceling out of the operation parameters sometimes caused a crash
R-07901
Interface
When updating the work offset in just one operation, work offsets in other operations sometimes changed as well
R-07905
General
The Annotation button was missing from the Report Viewer
R-07927
Geometry
Arcs/solid holes in older part files were sometimes in wrong location
R-07995
3
Mastercam 2017 ReadMe — Beta 5 Issues
BETA 5 ISSUES Mastercam 2017 Beta 5 features several bug fixes including the following list: Category
Description
Number
Interface
Added support to toggle visibility state of multiple levels (same as X9)
B-40376
Interface
In some instances, Stock Model objects would incorrectly appear as auto-highlighted
D-21912
General
First point selected did not match AutoCursor lock
R-07841
Toolpaths
Right-click drag and drop would sometimes copy/move unselected operations
R-07409
4
Mastercam 2017 ReadMe — Beta 4 Issues
BETA 4 ISSUES Mastercam 2017 Beta 4 features several bug fixes including the following list: Category
Description
Number
General
Improved performance in some instances when loading files containing a lot of entities
D-21539
General
Improved view manipulation (e.g., dynamic rotation) performance with files containing many entities
D-21564
General
Addressed a speed issue when loading some parts containing dirty solids
D-21775
General
Fixed Active Reports assert found in Beta 3
R-07411
General
Fixed a File, Merge issue with special ASCII characters
R-07493
General
When selecting a Material Library from within Machine Definition, mcam-material files were not listed
R-07603
Geometry
With some part files, turning on Shaded view mode locked up Mastercam
R-07484
Geometry
Addressed issues with Point Segment updating when interface panel was undocked
R-07541
Toolpaths
Dynamic OptiRough tool break/crash caused by inconsistent stepdowns
R-06590
Toolpaths
Dynamic OptiRough gouged with arc filter enabled and certain total tolerance values
R-07506
5
Mastercam 2017 ReadMe — Beta 3 Issues
BETA 3 ISSUES Mastercam 2017 Beta 3 features several bug fixes including the following list: Category
Description
Number
Configuration
Mouse dynamics option removed from Shading settings
General
D-21441: SOLIDWORKS assembly file was not coming into Mastercam, subsequent attempts failed dif- B-39870 ferently
General
D-21400: Opening some SOLIDWORKS files caused Mastercam to crash
General
Turning off all levels also turned off the toolpaths display
B-39955
B-40008 D-21304
General
Unseen geometry could still be selected when in No Hidden Wireframe view mode
D-21391
General
The "Set as Tplane" and "Set as Cplane" settings were reversed when set from New Plane dialog box
D-21525
Geometry
Split Solid Faces - Face stopped splitting at the start/end of the arc
B-39865
Interface
D-21499 - Added Attributes to Home tab and minitoolbar
B-40041
Interface
Contour ramp toolpath display was not always correct
R-07232
Interface
B-39866: Tab Key did not validate and move to the next field when MRU was open
R-07328
6
Mastercam 2017 ReadMe — Beta 3 Issues
Category
Description
Number
Interface
Single-key hot keys were triggered when renaming items in the Toolpaths and Solids Managers
R-07335
Lathe
Selecting Face Cutting set compensation to wrong side
D-21553
Mill
D-19814: Custom entry gouged in Dynamic Mill
B-39917
Post
Updated Post changes
B-38229
Tooling
D-17848: Lathe tool offset issue with X6 or older files - Change in one operation forced changes in all operations using the same tool
R-04088
Tooling
D-21418: "Tessellating" displayed on Status Bar after exiting the tool definition dialog box
R-07251
Toolpaths
D-21350: Slow Waterline processing time
B-39967
Toolpaths
Stock model dependent operations were sometimes marked dirty when canceling out of the operation parameters dialog box
D-21394
Toolpaths
Toolpath groups were sometimes out of order when importing operations
D-21449
Toolpaths
D-21349: 3D HST field calculation issue
R-06546
Toolpaths
Renumber Work Offsets - Operations across multiple planes were not updated if increment was 0
R-07074
Toolpaths
Toolpath Nesting - Crash when nesting clusters
R-07440
7
Mastercam 2017 ReadMe — Beta 2 Issues
BETA 2 ISSUES Mastercam 2017 Beta 2 features several bug fixes including the following list: Category
Description
Number
Interface
Contour ramp toolpath display was sometimes incorrect
R-06669
Interface
Third-party ribbon tabs had display issues
R-07192
Interface
AutoCursor settings were not enabled unless in an AutoCursor function
R-07060
Interface
Panels could not be resized smaller than a minimum size
R-07110
Interface
Spacebar was the only way to access FastPoint mode
R-07063
Interface
FastPoint Enter key validation had field update issues
R-39609
Wire
Autosync Rails could only be run once in a session
R-07147
Wire
Autosync Rails error message was placed behind the Mastercam window causing issues
R-07132
8
Mastercam 2017 ReadMe — Beta 1 Issues
BETA 1 ISSUES Mastercam 2017 Beta 1 features several bug fixes including the following list: Category
Description
Number
Lathe
Lathe POCO was incorrect with custom WCS
R-06790
Mill
Contour using Depth Cut caused posting error
R-06741
Mill
Chamfer Mill compensation was incorrect
R-06743
Mill
Radial entry was vertical when defined as an arc
R-06744
9
Mastercam 2017 ReadMe — TP6 Issues
TP6 ISSUES Mastercam 2017 TP6 features several bug fixes including the following list: Category
Description
Number
Interface
Planes Manager - Changing the work offset of a copied plane applies offset to original plane
R-06357
Lathe
Lathe Stock Flip had issues when choosing the final position of the chuck
R-06634
Mill
Circle mill retract issue
D-20600
Mill
RCTF - feedrate did not update when changing SteD-20707 pover value
Mill
Batch lost PostGhost icon when item was collapsed
D-20721
Mill
Finish/contour gouged part when Enhanced Slot Mill tool was used
D-20760
Mill
Reloading default parameters deleted operation
R-04770
Mill
Stock Model took very long time to process with reasonably-sized source operations
R-05471
Mill
Micro lift gouge in 2D Dynamic Rest Mill
R-05827
Mill
Gouge surface with high speed Hybrid toolpath with shank
R-06483
Mill
Shank clearance value was greater than specified by user
R-06484
Mill-Turn
Axis substitution start point unrolled incorrectly
R-06496
10
Mastercam 2017 ReadMe — TP6 Issues
Category
Description
Number
Toolpaths
Keep tool down value resulted in gouge
D-20709
Toolpaths
Taper selection did not work in AGIE AWF Contour toolpath
R-06465/ R-06512
11
Mastercam 2017 ReadMe — TP4/TP5 Issues
TP4/TP5 ISSUES Mastercam 2017 TP4/TP5 features several bug fixes including the following list: Category
Description
Number
API
Removed Agie.dll from the Mastercam
R-05668
Backplot/ Verify/ Simulation
Added Print option to Mastercam Simulator Backplot and Verify
B-37970
Backplot/ Verify/ Simulation
Rapid moves were jagged and tool crashed through part
R-03330
Backplot/ Verify/ Simulation
Mastercam Simulator C-axis face drill display of toolpath was incorrect
R-04138
General
Planes associativity was sometimes lost
R-05705/ R-05843
General
Import Operations - Added option to save/restore last used source library file
R-06269
General
Code Expert was not printing with displayed/chosen fonts
R-06373
Geometry
Improved visibility of solids and wireframe during Dynamic Transform
R-05831
Geometry
Display list did not refresh after adding points in the Entity mask on arc function
R-05990
12
Mastercam 2017 ReadMe — TP4/TP5 Issues
Category
Description
Number
Geometry
Curve All Edges - Old preview not removed when enabling Only Open Edges
R-06190
Geometry
Solids Hole Axis - Some blind holes go in the wrong direction
R-06234
Interface
Planes Manager - Added "Display origin values in World coordinates" option
B-37997
Interface
Planes Manager gnomon display not updated when scrolling through planes list
R-05793
Lathe
Plunge Turn toolpath posts G1 instead of G0 on Baxis positioning move
D-20043
Lathe
Lathe stock display shows leftover stock from canned finish operation
R-04834
Lathe
User prompted of tool clearance violation in error
R-05505
Lathe
Lathe Pickoff did not transfer geometry to proper levels
R-05925
Mill
3D HST Dynamic OptiRough stepover percentage field reset
D-19163
Mill
Waterline generated gouging pass
D-19745
Mill
2D Contour gouged part when Compensation was set to Control and Gouge Check was enabled
D-07979
Mill
Dynamic OptiRough Conventional Feed Rate was used when option was greyed out
R-04269
Mill
Stock Model gouged between operations during C-axis reposition
R-04311
Mill
Formula values were not used in Waterline toolpath
R-04727
13
Mastercam 2017 ReadMe — TP4/TP5 Issues
Category
Description
Number
Mill
Hybrid with trim to avoid holder severely gouged part
R-05311
Mill
RCTF in 2D HST Area Mill did not apply the feed rate when posted
R-05886
Mill
Stock Model did not consider chamfer corner treatR-05992 ment on tools
Mill
Stock setup crashed X9 Update 2 and Update 3 when regenerating the toolpath
Mill-Turn
Wrong output when drilling multiple holes in radial R-05020 directions with Y-cross setup
Tooling
Setup Sheet Tool List did not report all the tools from selected operations
R-03325
Tooling
Changing the feedrate of the default tool in Edit Tool propagated the changes to Mastercam even though Lock Feedrates was selected
R-04706
Tooling
Tool feedrate and spindle speed changes were not posted on specific file
R-06071
Tooling
Invalid tool profile in Verify
R-06110
Toolpaths
Multiaxis Link NCI outputs the wrong OP code
D-20241
Toolpaths
Toolpath Nesting did not place back side entities relative to chosen origin
R-04853
Toolpaths
Wire Transform doubled the toolpaths when multiple toolpath transforms existed
R-05387/ R-05919
Toolpaths
Machine Definition Manager title bar stays linked
R-05485
Toolpaths
Crash when using toolpath nesting with FBM Drill operations
R-06161
Toolpaths
Drill Point Manager dialog box lost focus after deleting a chain
R-06240
14
R-06041
Mastercam 2017 ReadMe — TP3 Issues
TP3 ISSUES Mastercam 2017 TP3 features several bug fixes including the following list: Category
Description
Number
Backplot/ Verify/ Simulation
Enabled TCP Options for classic Machine Simulation
B-37096
Backplot/ Verify/ Simulation
Added Auto Start option to Mastercam Simulator
B-37099
Backplot/ Verify/ Simulation
Synchronized view between Mastercam and Simulator
B-37213
Backplot/ Verify/ Simulation
C-axis Drill tool location and re-position moves were incorrect in Mastercam Simulator
R-03593
Backplot/ Verify/ Simulation
Machine Simulation showed incorrect result with a transform toolpath of a Contour Ramp
R-04484
Backplot/ Verify/ Simulation
Lathe C-Axis Drill operations did not Verify correctly
R-04577
Backplot/ Verify/ Simulation
Classic Backplot - Lathe and Mill-Turn feed rate disR-05073 played with incorrect units
15
Mastercam 2017 ReadMe — TP3 Issues
Category
Description
Number
Backplot/ Verify/ Simulation
Opacity option was not saved in Classic Backplot
R-06015
Configuration
Unsupported Shading settings removed
B-36988
General
Reinstated File, Edit/Open External (as Open in Editor)
B-37117
General
Improved feedback when changing work offsets for planes
B-37282
General
Allowed work offset matching when changing from Planes Manager
B-37283
General
Reference points from machine did not stick
R-05255
General
Planes associativity was lost
R-05705/ R-05843
Lathe
C-axis Cross Drill - Selecting points for each operation posted out multiple work offsets
R-03998
Lathe
Lathe Contour Rough using One-Way Cutting method caused multiple errors when regenerating
R-05011
Lathe
When stock diameter of material was same size as the part, Dynamic Rough (X9) did not regenerate
R-05566
Lathe
Lathe Dynamic Rough failed in X9 and caused asserts in 2017
R-06066
Mill-Turn
Redundant sync point output issue
R-05675
Tooling
Fixed problem importing a specific DXF file in stanD-07039 dalone Tool Manager
Tooling
Fixed problem with line segment facets not aligning when importing a DXF holder
16
R-04915
Mastercam 2017 ReadMe — TP3 Issues
Category
Description
Number
Tooling
Lathe tool insert projection incorrect in Backplot/UBVS caused undetected crash
R-05778
Tooling
Cutting speed reset when leaving the Tools tab before clicking OK (green check)
R-05784
Tooling
Tool Manager - Could not copy tool into a tool library
R-05923
Tooling
Block drill operation did not regenerate when block drill tool was replaced
R-06032
Toolpaths
2D Dynamic showed multiple instances of stepover warning
D-19114
Toolpaths
Formula values were not used in toolpath
R-04727
Toolpaths
Surface High Speed Dynamic OptiRough Transitions Entry feeds/speeds did not work properly
R-05375
Toolpaths
Wire Transform doubled the toolpaths when multiple toolpath transforms existed
R-05387/ R-05919
Toolpaths
Toolpath Transform - NCI Rotate toolpath was reversing arcs
R-06007
17
Mastercam 2017 ReadMe — TP2 Issues
TP2 ISSUES Mastercam 2017 TP2 features several bug fixes including the following list: Category
Description
Number
Backplot/ Verify/ Simulation
Enabled drop-down persistence of UBVS menus
B-36370
Backplot/ Verify/ Simulation
Added additional Fixtures definitions in Simulator
B-36371/ B-36810
Backplot/ Verify/ Simulation
Simulator did not recognize Lathe Stock Transfer from right to left spindle
R-03147
Backplot/ Verify/ Simulation
Removed Simulator Adaptive Quality progress bars for 3-axis as they were not used
R-03777
Backplot/ Verify/ Simulation
Rotary transform operations rapid moves were different than Backplot and Verify for Mill-Turn simulation
R-04962
Backplot/ Verify/ Simulation