RBC Assessment Task 7 Construction compliance report v3 PDF

Preview

Summary

Building Structures...

Description

Assessment Task 7 Construction Compliance Report

ASSESSMENT TASK 7 – CONSTRUCTION COMPLIANCE REPORT

Assessment Task 7 – Submission Instructions How to submit your assessment task file/s You will need to be familiar with Microsoft Word to complete this assessment task. You should save this file progressively as you work on it. Once you are ready to save, save this assessment task to your computer using the following naming convention: Abbreviated assessment number (e.g. AT7) followed by a dash, then first initial and last name (-JSmith). So, for example, this document could be saved as AT7-JSmith.docx.

When you have fully completed the assessment task and saved it, to upload your file for submission to the assessor: 1. Return to the LMS. 2. Click the Browse button. (Note: This button may have a different name, such as "Choose File", depending on your internet browser.) 3. Select the appropriate file e.g. AT7-JSmith.docx, and follow the prompts to upload it. 4. Repeat the steps for each file you need to upload.

Once you have uploaded assessment task files, you may want to review all your assessment task answers before clicking the Submit assessment button below the left hand menu. Clicking this button will forward your assessment task file to your assessor, and changes cannot be made. If you need to exit now, you can check and submit your assessment tasks later. To begin this assessment task, read all the Participant Instructions on the next page.

Residential Building Codes Online

© Housing Industry Association Ltd

Page 1 of 3

Assessment Task 7 Construction Compliance Report

Assessment Task 7 – Participant Instructions How to complete this assessment task

Tasks 7.1 to 7.3 are project tasks relating to Residential Building Codes. You are required to carry out an inspection of a low-rise construction project of your own choice to determine that the project is compliant with the NCC and if there are compliance issues that may require remediation. As a minimum you are required to describe at least two compliance issues that may require recommendation. You are to apply the performance requirements relating to the design and construction of the chosen building. Write a brief report to respond to the three assessment tasks below. In this you should identify:  the Class of building  type of construction  appropriate Volume and Section/Part of NCC  performance requirements. You should nominate the Acceptable Construction Practices (ACP) used as the DTS solutions or detail the Alternative Solution. Carry out an inspection and give advice on the outcome of this inspection. This report is to include photos, sketches or marked up plans which confirm your observations and assessments.

Residential Building Codes Online

© Housing Industry Association Ltd

Page 2 of 3

Assessment Task 7 Construction Compliance Report Task 7.1 Identify the Class of Building, the appropriate Volume of the NCC Identify the Performance Requirements and applicable Section(s) or Part(s) of the NCC. Is the building ‘low-rise’ construction? Why? Please include labelled images, plans, section and sketches as appropriate. Task 7.2 Nominate the Acceptable Construction Methods or Practices used as the Deemed-to-Satisfy (DTS) solution or detail the Alternative Solution and determine compliance. Include in your response any assessment methods for determining this compliance? Task 7.3 Carry out an inspection and advise if the project is compliant, and, if not, what area(s) require(s) remediation

Residential Building Codes Online

© Housing Industry Association Ltd

Page 3 of 3...