Title | TS-CSA-150-Tate Structural Grid REV 1 - RKD Response Status A |
---|---|
Author | Soubra Senmarec |
Course | Machine Design |
Institution | Beirut Arab University |
Pages | 25 |
File Size | 2.1 MB |
File Type | |
Total Downloads | 26 |
Total Views | 125 |
steel connection design for hollow tube...
TECHNICAL SUBMITTAL FORM Project Name:
MSFT Dub 13
Project No.:
1179
Submittal No.:
TS-CSA-150
Revision No.:
1
To: Attention of: Date Issued: Response Req’d.:
RKD Kevin O’Sullivan 01-03-2021 15-03-2021
Product / Material / Equipment Details Product / Material / Equipment
Tate Structural Ceiling Grid
Provide full name and also names of any companion items to be used
Supplier / Manufacturer
Tate
Provide full name and address
Intended Use
Ceilings in mechanical gallery
Provide full details of the intended use of the Product / Material / Equipment
Is the Product / Material / Equipment as specified or is an alternative proposed? Are there any derogations / deviations from the Project Specifications for this item? Indicate the basis for equivalence of the alternative solution proposed.
As specified
No
N/A
Clarify this relative to a specific paragraph, sentence and page within the specification.
CE Marking Details CE Marking Provided?
Yes
State relevant hEN(s) & year
EN13964:2004+A1:2006
http://ec.europa.eu/growth/singlemarket/european-standards/harmonisedstandards/construction-products/
Date of applicability of the standard as a harmonised standard Date of the end of the coexistence period Declaration of Performance provided? (Enclose DoP, if applicable) Harmonised standard(s) & year covered by DoP
08/04/2016
08/04/2017 Yes
EN13964:2004+A1:2006
Page 1 of 4 IMS Document No: 1.04.04.01 QFC_03_PSCS
Revision: 05
Where CE marking is not available:
N/A
Supplier is to provide a letter confirming on what basis it is not available i.e. That there is no harmonised standard covering the product type etc.
Agrément Certification Irish Agrément Cert (IAB) or British Board of Agrément (BBA) provided?
No.
Note that where an IAB / BBA cert covers more than one product, the product proposed should be clearly highlighted.
Expiration date of IAB Cert
N/A
Product Data Sheet Provided?
Yes, 20EU254_DUB13 Tate HAC Submittal (GRID)
Data Sheets Note that where a Data Sheet covers more than one product, the product proposed should be clearly highlighted. List document names submitted.
Test Data or Other certification provided.
CE for Grid
Notes Product submittal for Tate Structural Ceiling Grid only.
Comments
Page 2 of 4 IMS Document No: 1.04.04.01 QFC_03_PSCS
Revision: 05
Status B comments from RKD in BLUE, Modubuild responses in RED PLEASE CONFIRM THAT THIS SUBMITTAL COMPLIES WITH THE REQUIREMENTS AS SETOUT WITHIN THE RKD SPECIFICATION IN PARTICULAR THE CEILING SYSTEMS LOADS TO BE SUPPORTED. This ceiling will support the loads as confirmed by Michael Jackson from Hanley Pepper on February 23rd 2020. PLEASE CONFIRM THAT THIS SUBMITTAL COMPLIES WITH THE AIR LEAKAGE REQUIREMENTS & dB RATINGS REQUIRED, AS SET-OUT WITHIN THE RKD SPECIFICATION IN RELATION TO THE CEILING SYSTEMS, TILES, GRIS, CLIPS, ETC. Air leakage investigation attached to submittal. Sound properties are covered in acoustic tile submittal. PLEASE CONFIRM THAT THIS SUBMITTAL COMPLIES WITH THE CEILING TILE, GRID & CLIP REQUIREMENTS, AS SET-OUT WITHIN THE RKD SPECIFICATION IN RELATION TO THE CEILING SYSTEMS. This ceiling grid submittal is provided as per the RKD specification.
Prepared on behalf of Winthrop by Name:
Emmett Gorman
Position CSA Manager / Role:
Signature:
Date: 01/03/2021
Company: WEC
Page 3 of 4 IMS Document No: 1.04.04.01 QFC_03_PSCS
Revision: 05
Submittal Review and Status ☐
Status A
Approved to Proceed
☐
Status B
Approved with comments noted below. Comments to be addresssed & resubmitted.
☐
Status C
Not Approved. The information supplied does not demonstrate fitness of material or the material does not fulfill the statutory requirements and/or project requirements as noted below.
Reviewer Comments - Submittal is for Tate Structural Ceiling Grid only and subject to approval of site specific details to be submitted in a separate submittal - All dimension to be checked on site prior to fabrication
Reviewer Notes
Quality Control Requirements
Reviewed by Name:
John O'Sullivan
Position / Role:
Signature: Company:
Date:
09/03/2021
RKD Architects
Page 4 of 4 IMS Document No: 1.04.04.01 QFC_03_PSCS
Revision: 05
PRODUCT APPROVAL REQUEST Issued To:
Winthorp Turnpike Business Park, Turnpike Lane, Ballymount, Dublin 22
Prepared By:
Tel:
00353 1 4600214
Tel:
Paul Devoy Modubuild Designs Ltd Unit 5, Sark Business Park, Purcellsinch Ind.Est. Dublin Rd. Kilkenny 00353 56 781 9000
Email:
[email protected]
Email:
[email protected]
Project No:
MB453
MB Issue Date:
01-03-2021
Project Name:
MSFT Dub 13
Return Date Required:
15-03-2021
Document No.
MB453-PAR-009
Revision:
1
Product Technical Submittal D Modubuild formally request your approval of the proposed products: Tate Structural Ceiling Grid Supplier: Tate Type: Structural Ceiling Grid
Please confirm your decision by ticking the appropriate box
Tick Here
Please proceed with this product – No Comments
☐ ☐ ☐
Please proceed with this product – With Comments Please DO NOT proceed with this product Reason for non-approval where applicable or comments:
SIGNATURE:
…………………………………………………
DATE:
………………………………………
NOTE: Approval of a product submittal supersedes all previous submissions and correspondences relating to that product.
QF 8.01-03
Data & Flooring Technology Structural Ceiling Solutions Europe
Submittal Pack Tate Grid Project Reference: 20EU254_DUB13_TateGrid_Submittal
Tate Grid Metric Tate Grid GRID SPECIFICATIONS
Field Connector for simple installation
M10-1.5 Turnbuckle connections to structural steel Main Runner with location notches
Floating Perimeter detail
Structural Tee with coped ends
CONNECTOR SPECIFICATIONS
Field-Cut Perimeter Connector
• High Strength Cast Aluminum Construction • Corrosion Resistant Aluminum Casting • Ribs on connector to engage with grid and prevent racking • Attaches to grid members with (4) 1⁄4”-20 screws • M10-1.5 Turnbuckles with starter rod threads into connectors on a 1200x1200mm spacing • On site modifiable connectors for perimeter installation
50.8mm
50.8mm
COMPONENTS Field Connector
30mm
Perimeter Extrusion
• Pre-engineered and factory produced aluminum structural ceiling grid with continuously threaded slot • Grid consists of Main Runners with notches for precise location and connection of coped Structural Tees using simple four screw connectors • Capable of supporting power modules, light fixtures, cable trays, partitions, and other accessories • Load performance based on building connection spacing of 1200mm on center • Max grid point load at midspan of 1.7 kN • Max grid uniform load of 2.4 kN/m2 • Safety factor of 2 for all connections • Grid member center to center spacing can be selected to accommodate project specific specs. (see page 3 for more information)
39.6mm
Mains and Structural Tees
Perimeter & XL Connector
• 3600mm Main Runner / 3600mm Perimeter Angle • 600mm Structural Tee / 1200mm Structural Tee • Field Connector / XL Connector • Perimeter Connector • 1⁄4”-20 x 1-1⁄4” Screws w/ 1⁄4” Lock washer • M10-1.5 x 178mm Turnbuckle Assembly with Starter Rod • Ceiling Hold Down Clips (optional) • Factory Applied Gasket (optional) • Ceiling Tiles & Lights (supplied by others) • Threaded Rod Connection to Building (supplied by others)
GRID OPTIONS Grid Color ☐ White Paint
☐ Black Paint
☐ Clear Anodized
Grid Thread Pattern – Bottom Slot ☐ M10-1.5 ☐ 3⁄8”-16 ☐ 1⁄4”-20 ☐ 1⁄4”-20 Hidden Slot
Simple supported 4 screw assembly and vertically supported fl anged grid
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Pre-threaded connections for cable trays, utilities and other accessories
Rev - 08/12/16
Grid Spacing – On center (see page 3 for detail) ☐ 600 x600mm ☐ 600 x 1200mm ☐ 610 x 610mm ☐ 610 x 1210 ☐ 613 x 613mm ☐ 613 x 1213mm ☐ Other © 2016 Tate Access Floors, Inc. 1 of 9
Tate Grid Metric Tate Grid PROFILE OPTIONS
M10 Bottom Slot*
⁄8”-16 Bottom Slot*
3
10.4
10.4
• 19.1
⁄4”-20 thread
1
•
50.8
• 20.1
⁄4”-20 thread
Continuous threaded M10-1.5 bottom slot
Continuous threaded top slot
1/4”-20
19.1
1
•
M10-1.5 RH thread
Continuous threaded 1/4”-20 top slot
•
Continuous threaded slot
3/8”-16 bottom
Utilizes standard hardware connectors and features of Tate Grid
50.8
•
⁄8”-16 RH thread
3
20.3
14.2
Utilizes standard hardware connectors and features of Tate Grid
13.2 12.7
13.2
3.2
39.6
3.2
39.6
⁄4”-20 Slot*
⁄4”-20 Hidden Slot*
1
1
10.4
10.4
19.1
1
⁄4 ”-20 thread
•
Continuous threaded 1/4”-20 slots on top and bottom
•
Utilizes standard hardware connectors and features of Tate Grid
Continuous threaded 1/4”-20 slots on top and bottom
•
Bottom 1/4”-20 slot is hidden, can be exposed by drilling through bottom wall cover
•
Utilizes standard hardware connectors and features of Tate Grid
19.1
⁄4”-20 thread
1
50.8
50.8
19.1
19.1 14.7
14.7
•
3.2
3.2
39.6
39.6
⁄4”-20 Perimeter*
1
Light Structural Extrusion* 9.9
10.4
•
1
⁄4”-20 thread
• 50.8
• 16.8
6.4
39.6
3.2
Continuous threaded 1/4”-20 top slot
⁄4”-20 thread
1
Utilizes standard hardware connectors and features of Tate Grid For infill applications where complete mounting flexibility across the ceiling is not required
•
Continuous threaded 1/4”-20 top slot
•
Intended for fixed perimeter installation areas (See page 6)
•
Utilizes all standard hardware connectors and features of Tate Grid
50.8
14.7
3.2
30
*Note: All Dimensions are in Millimeters
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 2 of 9
Tate Grid Metric Tate Grid GRID SPACING AND TILE SIZING Center-on-Center Grid Spacing
Inside Grid Dimension Tile size
If you want the Grid Spacing to be on a 600 x 600mm or 600 x 1200mm module size, use this table to determine tile size requirement: Grid Profile 1
⁄4”-20 Bottom Slot & ¼”-20 Hidden Slot
M10-1.5 & 3⁄8 ”-16 Bottom Slot
Grid Spacing (L x W)
Tile Size (L x W)
600 x 600mm
582 x 582mm +/- 4mm
600 x 1200mm
582 x 1182mm +/- 4mm
600 x 600mm
580 x 580mm +/- 3mm
600 x 1200mm
580 x 1180mm +/- 3mm (see example below)
Note: Maximum Tile Size = Inside Grid Dimension minus 3.2mm. Minimum Tile Size is based on a minimum overlap on the extrusion flange of 3.2mm when the tile is shifted all the way to one side.
If you want the Grid Spacing to be on a larger module size to fit standard 600 x 600mm or 600 x 1200mm nominal tile sizes, use this table: Grid Profile 1
⁄4”-20 Bottom Slot & ¼”-20 Hidden Slot
M10-1.5 & 3⁄8 ”-16 Bottom Slot
Grid Spacing (L x W)
Tile Size (L x W)
610 x 610mm
593 x 593mm +/- 4mm
610 x 1210mm
593 x 1193mm +/- 4mm
613 x 613mm 613 x 1213mm
593 x 593mm +/- 4mm 593 x 1193mm +/- 4mm (see example below)
Note: Maximum Tile Size = Inside Grid Dimension minus 3.2mm. Minimum Tile Size is based on a minimum overlap on the extrusion flange of 3.2mm when the tile is shifted all the way to one side.
Sizing Based on 600 x 1200mm Grid Spacing
Sizing Based on 600 x 1200mm Nominal Tile Size 593mm
580mm
1193mm
1180mm
1213mm
1200mm
600mm
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
613mm
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 3 of 9
Tate Grid Metric Tate Grid PERFORMANCE CRITERIA The bottom side of the structural grid is available with an M10-1.5, 3⁄8”-16, or 1⁄4”-20 continuous threaded slot for mounting items directly to the grid. Refer to the table below for load performance details on the grid and connections. Structural Tee Defl ection (Midspan Beam)
1200mm 600mm
Load
Ultimate Load = 3.1 kN
Calculate midspan beam defl ection at any point below yield
Deflection (mm)
30
S=
24
Wl 3 48EI
S = Deflection W = load l = 1200mm
E = 68.9 kN/mm2 I = 63700mm4
18 12
Yield Point = 1.7 kN
6
Load (kN)
System Performance Criteria
Hanging Method
Grid Load Performance (with building connections 1200mm x 1200mm on centers)
Connection to Bottom Slot (3⁄8”-16 or 1⁄4”-20)
Connector to Grid
1.7 kN*
1.7 kN*
3.6 kN*
2.4 kN/m2
-
-
3.1 kN
3.4 kN
7.2 kN
Point Load (kN) Uniform Load (kN/m2) Ultimate Point Load (kN) *Max point load no less than 1200mm apart in any direction.
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 4 of 9
Tate Grid Metric Tate Grid FIELD CONNECTOR ASSEMBLY
Structural Tee coped for simplified installation and stronger connections
Ribs on connector to align with grid and prevent racking
Main Runners notched to positively position connectors on center every time
XL CONNECTOR
Main Runner Notch
XL Connector is designed for additional support at the ends of each Main Runner.
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 5 of 9
Tate Grid Metric Tate Grid PERIMETER CONNECTOR
Perimeter Connector can be cut on site to be used in various locations to connect grid together.
Bottom of Perimeter Connector is designed with ribs that locate the connector on Perimeter Extrusion.
MAIN RUNNERS AND STRUCTURAL TEES 600mm nominal
All 600mm and 1200mm Structural Tees have coped ends which allows the grid to rest on the longer sections for stronger connections and simplified installation. 600mm nominal
600mm nominal
All 1200mm Structural Tees and Main Runners are notched every 600mm on center for proper alignment and spacing of the connectors.
600mm nominal
600mm nominal
3600mm Note: Structural Tee and Main Runner dimensions are nominal and are adjusted for custom-sized ceiling grid designs Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 6 of 9
Tate Grid Metric Tate Grid PERIMETER ANGLES
XL Connector (Field-Cut) for Floating Installation Perimeter Connector
Main Runner
Wall Angle (By Others)
Perimeter Angle
Floating Installation Detail
Fixed Installation Detail
Main Runners are utilized when installing with a floating detail. When installing with a floating perimeter, XL Connectors can be utilized to take advantage of the notches and ribs that align extrusions and prevent racking.
Perimeter Extrusions are designed to create a clean corner joint assembly. Perimeter Angles can be cut on site to desired length when assembled along perimeter walls. Perimeter Angles can also be bolted directly to the wall with appropriate fasteners for wall type.
Additionally it is recommended to utilize a Wall Angle attached to the perimeter.
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Note, pre-drilling is recommended and through holes are suggested for simpler light fixture or drop ceiling tile installation.
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 7 of 9
Tate Grid Metric Tate Grid 600 X 600mm CEILING GRID WITH 1200 X 1200mm TURNBUCKLE LAYOUT AND FIXED PERIMETER
3 3
1
8 4
1
5 7 6
2 2
3600mm
1 Main Runner
1200mm
5 Structural Tee
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
2
6
3600mm Perimeter Angle
3 Field Connectors
4 XL Connector
600mm Structural Tee
7 Perimeter Connectors
8 Turnbuckle Assembly
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 8 of 9
Tate Grid Metric Tate Grid TURNBUCKLE ASSEMBLY
Internally Threaded Anchor (Supplied by others)
RH M10-1.5 Threaded Rod and connection to decking (Supplied by others)
M10-1.5 LH/RH x 178mm Turnbuckle
M10-1.5 Threaded Starter Rod into Turnbuckle
M10-1.5 RH Threaded Connection to Field Connector
Tate Access Floors, Inc. 7510 Montevideo Road Jessup, MD 20794 Tel (410)799-4200
Rev - 08/12/16
© 2016 Tate Access Floors, Inc. 9 of 9
DocumentNo.
ABC/002...