4d Ultra FG Product Specification Shhet PDF

Preview

Summary

Download 4d Ultra FG Product Specification Shhet PDF

Description

Ultra FG

Ref: Sheet: 1 of 3 Date: March 19,2012 Cancels: First Issue

Point of Manufacture – Davidson, NC PRODUCT SPECIFICATION GENERAL DESCRIPTION: Ultra FG is a custom-compounded compressor fluid specifically formulated for OEM use only on rotary screw air compressors. Critical performance features include low fluid volatility, enhanced water demulsibility, superior hydrolytic stability, improved sealing effect, reduced friction, enhanced wear protection and superior fluid dispersing characteristics to eliminate “sludging” and deposit-forming tendencies. Ultra FG is fully compliant with 21 CFR 178.3570 and meets the requirements of USDA/NSF H1 (Lubricants with Incidental Food Contact). GENERAL PACKAGE DESCRIPTION: Ultra FG is available in three different size packages: 5 liters (1.2 gallons) 20 liters (5.3 gallons) 208 liters (55 gallons) LOCATION: Ultra FG is intended to be used in rotary screw air compressor applications requiring food-grade lubricant. PERFORMANCE: Ultra FG is compounded with a blend of next-generation, 100% food-grade synthetic base oils and advanced additive technologies to provide superior performance over competitive lubricating oils. This custom formulation, based on extensive research and development, provides Ultra FG with an optimized combination of anti-wear agents, rust inhibitors, and antioxidants that demonstrates a synergistic performance advantage over traditional air compressor fluids. Performance Features  Outstanding anti-wear protection for pump protection  Resists the formation of foam, sludge, varnish and corrosive acids  Superior rust and oxidation stability for long, trouble-free life  Hydrolytically stable and readily separates from water  Superior dispersing characteristics for extending drain Intervals BASE FLUID ADVANTAGES: The food-grade alkylated synthetic base fluid utilized in Ultra FG provides several benefits over conventional synthetic base fluids such as polyalphaolefins (PAOs) and esters. While PAOs handle heat and oxidation better than mineral oil, they are

©

2011 Ingersoll Rand

Ultra FG

Ref: Sheet: 2 of 3 Date: March 19,2012 Cancels: First Issue

Point of Manufacture – Davidson, NC PRODUCT SPECIFICATION essentially synthesized paraffinic oils in performance and are subject to abrasive carbonization and depositing in equipment components. Additionally, they provide neither dispersing characteristics nor solvency to the lubricant to prevent agglomeration (depositing) of ingested materials. Esters, while possessing solvency and dispersing characteristics which are beneficial in the application, suffer from hydrolytic instabilities. Water entrained in the lubricant can cause the ester to hydrolyze, breaking down the ester into component products such as acids and alcohols which can varnish components and lead to premature failure. The synthetic alkylated naphthalenes used in Ultra FG provide solvency and dispersing characteristics similar to esters but do not suffer from hydrolytic instability. Additionally, they do not form abrasive deposits such as those formed by mineral oils and PAOs. WEAR PROTECTION: Ultra FG is specifically formulated to provide enhanced wear protection. Studies have shown that the additive chemistry in Ultra FG significantly reduces wear over conventional oils, dramatically increasing component life. THERMAL OXIDATIVE STABILITY: Ultra FG outperforms both synthetic and conventional fluids in thermal and oxidative stability, as demonstrated by the Rotating Pressure Vessel Oxidation Test (ASTM D 2272). This enhanced performance translates into longer drain intervals, trouble-free operation and increased resistance to varnishing. WATER SEPARATION AND AIR ENTRAINMENT: Ultra FG readily separates from water and air, eliminating emulsions that inhibit the oil’s ability to lubricate, decreasing the potential for forming deposits, and improving efficiency. Rapid water separation ensures easy drainage from the sump, reducing the potential for rust and corrosion of the system components. MEETS INDUSTRY REQUIREMENTS:  USDA/NSF H-1 Compliant  Kosher and Parve Certified  Compliant with FDA 21 CFR 178.3570 “Lubricants with Incidental Food Contact”

©

2011 Ingersoll Rand

Ultra FG

Ref: Sheet: 3 of 3 Date: March 19,2012 Cancels: First Issue

Point of Manufacture – Davidson, NC PRODUCT SPECIFICATION TYPICAL DATA Property Viscosity at 40oC, cSt Viscosity at 79.5oC, cSt Viscosity at 100oC, cSt Viscosity Index Flash Point oF(oC) Flash Point oF(oC) Pour Point oF(oC) RPVOT, minutes Rust Prevention Properties Foaming Characteristics Sequence I, ml/ml Sequence II, ml/ml Sequence III, ml/ml Emulsion Characteristics at 54cC Oil Layer, ml Water Layer, ml Time, min. Hydrolytic Stability Weight Change of Copper Panel, mg/cm2 Appearance of Copper Panel % Change in Viscosity Change in Acid Number, mh KOH/g Total Acidity of Water Layer, mg KOH % Insolubles Air Release Properties @ 50oC, min.

©

2011 Ingersoll Rand

Value 48.5 12.5-15.0 7.7 125 507 (264) 442 (228) -56 (-49) 1875 Pass 40/0 30/0 0/0 40/40/0 (20) 40 40 20

Method ASTM D 445 ASTM D 445 ASTM D 445 ASTM D 2270 ASTM D 92 ASTM D 93 ASTM D 97 ASTM D 2272 ASTM D 665B ASTM D 892

ASTM D 1401

ASTM D 2619 -0.025 Shiny 1B -.07 +0.03 0.00 0.007 4.8

ASTM D 445 @ 40oC ASTM D 974

ASTM D 3427...