Final Project Tools with simple presem PDF

Preview

Summary

a work to derify the level of knowledge of the student and his level of knowledge of different types of tools to demonstrate what was learned in the classes...

Description

2021 Centro Industrial de Mantenimiento Integral - CIMI

Apprentice name Apprentice Id number Group Id number

Final Project: Tools

You can support your research on the following pages: https://www.collinsdictionary.com/ https://www.wordreference.com/ https://dictionary.cambridge.org/es-LA/

Basic tools Tool Hammer

Description

Sentence example

A tool with a heavy metal head mounted at right angles at the end of a handle, used for jobs such as breaking things and driving in nails

The apprentice bought a hammer to repair the workbench.

Image

Tool for banging in nails.

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Cold cutter

The cold cutter is a manual cutting tool that is used mainly to cold cut sheet metal blows that are given to the head of this tool with a suitable hammer.

Pliers

A small tool used for I think these are pliers pulling, holding, or cutting that has two handles that you press together in order to bring together two specially shaped pieces of metal at the other end

Tape measure

A strip of plastic or metal used for measuring that can be rolled up when not being used

Where did you leave my tape measure?

Industrial scalpel

A very sharp knife used for stripping wires or other uses

There was a scalpel I could use.

That's what I wanted the cold cutter for, Jack.

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Hacksaw for metal

A small saw used especially for cutting metal

When Ellie realized it was a hacksaw, her blood iced over.

Set of screwdriver s

A tool for turning screws, consisting of a handle joined to a metal rod shaped at one end to fit in the cut in the top of the screw

Here Jason, I brought a selection of screwdrivers, one should fit

The instrument known as wire stripper is used as its name implies to strip wires

Andres, where did you leave me the wire stripper, do I need it?

A container in which you keep and carry small tools, especially those used in the house

John dropped the papers from the tool holder.

Wire strippers

Tool holder

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Ladder

A piece of equipment used for climbing up and down, that consists of two vertical bars or pieces of rope joined to each other by a set of horizontal steps:

Getting up the ladder was easy enough - it was coming down that was the problem.

Tip pliers

Its main functions are to hold and apply torsional forces. They are widely used by electricians for manipulative cables and wires.

This pliers do not work for me, bring the tip pliers

Insulating gloves

A garment worn on the hand and wrist for warmth or protection, with separate parts for each finger

Andres put on your insulating gloves before starting work

Sandpaper

The file is a manual tool that is used for the wear and refinement of pieces of different

I'm almost done with the piece, I just sandpaper it and that's it

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

materials such as metal, plastic or wood. Computer

An electronic machine that is used for storing, organizing, and finding words, numbers, and pictures, for doing calculations, and for controlling other machines:

All our customer orders are handled by computer.

Insulation boots

A type of shoe that covers the whole foot and the lower part of the leg:

I'm going to try on my new insulation boots. in the company

Tweezers

A small piece of equipment made of two narrow metal strips joined at one end. It is used to pluck hairs or pick up small objects by pressing the two metal strips with your fingers

Have you already thrown away the tweezers I bought you?

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Intermediate tools Tool

Description

Sentence example

Hex Wrench (Set)

It is an L-shaped tool consisting of a rod having a hexagonal cross section, used to turn a screw ( Allen screw) with a hexagonal recess in the head. A different size of key is required for each size of screw.

I lost my hex wrench set yesterday, do you know where I can buy one?

Portable drill

A tool or machine that makes holes

She bored a hole in the tree with a portable drill.

Image

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Tone generator

Tone generator to identify network, telephone or coaxial cables. It is used to follow a certain cable in an installation, connecting the transmitter to one end of the cable and bringing the tone generator closer to the cable,

You were the one who burned the tone generator

Cleaning fluid

A solvent or other solution to remove stains or clean different types of objects

Who dropped the cleaning fluid on top of the tools

Keyset

The wrench set offers universal use options thanks to the combination open-end wrench and ratchet ring wrench Ideal for places with little space, as the ratchet works from a retraction angle of 3 ° thanks to the toothless mechanism

I can't find my set of keys, help me find it?

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Torque wrench

A type of wrench with a gauge attached to indicate the torque applied to the work piece

Hydraulic jack

The hydraulic jack is used for lifting loads by manually operating a crank or lever

Somebody's got a hydraulic jack, I punctured a tire?

Battery tester

The internal resistance tester in conjunction with the battery voltage sets the standard for evaluating the deterioration and remaining life of lead-acid batteries, providing a comprehensive diagnosis through battery voltage and resistance tests.

Who was the one who left the battery tester plugged in that could damage it?

Who has a torque wrench that I need?

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Retractable mooring ropes

The use of retractable lifelines and anchor lines that support sharp edges, as well as rescue devices, is common.

Who was the last to use the retractable rope that broke it?

Pipe cutter

The pipe cutter is a cutting tool for metal pipes, especially used in copper. Used to make right angle cuts.

Andrés, did you use the pipe cutter like I told you?

Voltage detector

Voltage detectors allow you to quickly and economically test for the presence of voltage on AC switches, sockets, and circuits before working on them.

Well, first we start the work, we check the voltage of the machine with the voltage detector.

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Cable tracker

Cable tracer, composed of a transmitter and a receiver, is capable of detecting Ethernet, telephone and power cables without the need to open the insulation.

For what are you opening the insulation better use the cable tracker

Coaxial cable

Coaxial cable A thin cable used to connect the modem and television to the cable television system.

I know why the television does not work, the coaxial cable is bathed

Antistatic wristband

It consists of a Velcro strap to fix it on the wrist connected to a grounding cable that allows any accumulation of static electricity to be discharged on the body of a sensitive equipment operator.

Put on your antistatic wrist strap, if not, I can't let you work like this

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Glue gun

A piece that heats up the glue and is used to glue objects

Who was the one that damaged the glue gun?

Advanced tools Tool Multimeter

Description It is the essential tool for electrical diagnosis and troubleshooting. It will allow you to measure Voltage, Resistance and Amperage

Sentence example

Image

The electrician needs the multimeter to complete the device test

It is an instrument designed to measure electric current, voltage, and usually resistance, typically over several ranges of value

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

Cordless screwdrivers also feature a push button or trigger, which stops operation when released, and most of these tools have a switch to activate the reversible function.

Who let the cordless screwdriver unload?

cctv test monitor

CCTV stands for Closed Circuit Television and is commonly known as video surveillance. “Closed loop” means that the transmissions are generally transmitted to a limited (closed) number of monitors

Who was the one who damaged the CCTV test monitor because he has to pay for it?

Network cable tester

The LAN network tester is a multifunctional measuring instrument. In addition to measuring standard voltage and current parameters, the LAN network tester has a network analysis.

The network cable tester was rolled off-site by my boss.

cordless screwdriver

It was Juan, yesterday I saw him use it

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

soldering iron

This electric tool is used in the tin soldering process, basically it is an electrical resistor connected to a conical copper tip, with which the tin wire filler material can be melted.

Be careful you can burn yourself with the soldering iron, that thing gets very hot.

rotary multitool

Carve or polish wood. Do different jobs with acrylics. Cuts of stuck or rusted bolts. Remove rust from a surface.

I told him to leave the rotary tool in my office because it had already been lost.

briefcase with socket wrenches

Allows you to mobilize your socket wrenches to any place you want in a very organized way

You dropped my briefcase with socket wrenches

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

calibrator

A device for measuring widths or distances , consisting of two long, thin pieces of metal fixed together at one end

Where did they leave me the calibrator?

desoldering pump

A disoldering tool (also called a tin pump) is a tin aspirator, a tool to support the soldering or desoldering process. ... In the middle there is a tank where the vacuum is made that collects the tin.

The one who soldered this wrong should clean it with the desoldering pump and it hurts to start again.

third hand with magnifying glass

This tool is known as "Third Hand" and is used to hold the part to be soldered, for example a printed circuit board. The tool has a soldering iron holder and a magnifying glass.

Who bathed one of the arms of the third hand that the company has just bought?

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

power supply

An adjustable power supply is one that allows adjusting voltages in a certain range according to the needs of what we need to feed. In this case it allows to adjust voltage values between 0 and 15 volts with a current value of up to 1.5 amperes for workshop tests.

Today you have to buy regulated source take the money

Electric generator

A generator is a rotating electrical machine that transforms mechanical energy into electrical energy. ... When an electric generator is in operation, one of the two parts generates a magnetic flux (acts as an inductor) for the other to transform it into electricity (acts as an armature).

We quickly ran out of power and had to turn on the electric generator.

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

milling machine

The milling machine performs the function of creating parts of certain shapes, through a machining process of these and through the use of a milling cutter. Machining is a way of manufacturing by removal of material, both by abrasion and by chip removal.

Help me get the milling machine off the freight truck, call three others, this is even heavy.

fiber optic cable

The function of fiber optics is to transfer these light signals at different frequencies

I told them to pick up the fiber optic cable when they stop using it.

pneumatic polisher

It is used to smooth or polish metal or wooden surfaces, such as car bodies or furniture. To use it, the appropriate sandpaper must be placed according to the desired wear and the machine must be operated.

Andres the employee on his first day was using the pneumatic polisher and damaged it.

GC-F -005 V. 05

2021 Centro Industrial de Mantenimiento Integral - CIMI

lathe

In the metalworking industry, the lathe is a machine that turns the parts, while other tools make the cuts according to the required conditions. This is known as "geometrically machining the parts".

I told you to measure the piece you had to make well, before using the lathe this does not work.

GC-F -005 V. 05...